Garmin 500, cranks, outfront mounts, extenders, bars, seat post

joey100

Few bits for sale, some has been up before some I've just found after going through a box of stuff at home.


Garmin 500. Dog bit the edge of it and has cracked the screen a bit. No issues using it, no damage to the display. I've tried to take the best picture of the screen I can to show the damage. 60 euro.





Can't find the cable that came with it, so really is all that's pictured, rubber cover at the back still in place.


3 Garmin out front mounts. 2xSram, 1 still in packaging. 1 barfly that will also take a garmin 1000. 10 euro each.






2x valve extenders and a pump chuck for use with a disc wheel. 10 euro.



Seat post, FSA, 31.6mm. Alloy. 10 euro.



Cannondale handlebars, Unsure of width but narrow enough, 40cm I'd say. Never used, off a brand new bike. Shallow drop.20 euro.



Tiagra 10 speed, double front derailleur. Band on. 10 euro.



Tiagra compact crank, 170mm, fair bit of use. 30 euro.



FSA Gossamer crankset, 172.5mm, 52/36, brand new, never used. 50 euro.




Because of the low cost I'd rather not post. Based in North county Dublin, work in Dublin 4.

helimachoptor

is the garmin still waterproof? Have a 200 with a crack but if it rains water gets into the screen which is a pain

joey100

Honestly not sure. I covered the crack with 2 layers of electrical tape, doesn't cover anything on display and had no issues with it.

boomdocker

50 quid for seatpost, bars, front mech and tiagra crankset?

wouldn't be able to collect for a week or two

joey100

Sounds good to me boomdocker. I'm out of the country for two weeks from Monday but am actually down in Bunclody this weekend if that suits. If not I've no problem hanging onto the stuff for you.

helimachoptor

Joey, i'll bid 50 for the Garmin, but need to inspect it first.

I'm happy to wait until your back aswell. (work in D4 myself but not around tomorrow)

joey100

No problem, I can hold it until I'm back Helimachoptor. I'll give you a shout when I'm back and we can arrange meeting up so you can inspect it.

timbel

Will take the out front mount in packaging for 10.
Not around this weekend to pickup though - let me know when suits.

joey100

No problem. I'm out of the country for two weeks so will have to wait until I'm back around if that's OK?

timbel

joey100 wrote: »

No problem. I'm out of the country for two weeks so will have to wait until I'm back around if that's OK?

No problem, just pm when back.

boomdocker

joey100 wrote: »

Sounds good to me boomdocker. I'm out of the country for two weeks from Monday but am actually down in Bunclody this weekend if that suits. If not I've no problem hanging onto the stuff for you.

crap - only just saw your reply now - let me know when you're back..

barleyman

i'll take the barfly at asking if you'll post.

thanks

joey100

Only just back here now so catching up with this,

Helimachoptor I'm in the office all week this week so if you want we can try to arrange an inspection of the Garmin 500.

Timbel, I'll accept the offer for the mount in packaging. Let me know where and when suits to meet.

Sorry Barleyman, It would cost 2/3 euro to post so will hold for someone a bit more local. I am up and down to wexford once a month or so if that suits and you want to wait.

helimachoptor

joey100 wrote: »

Only just back here now so catching up with this,

Helimachoptor I'm in the office all week this week so if you want we can try to arrange an inspection of the Garmin 500.

Timbel, I'll accept the offer for the mount in packaging. Let me know where and when suits to meet.

Sorry Barleyman, It would cost 2/3 euro to post so will hold for someone a bit more local. I am up and down to wexford once a month or so if that suits and you want to wait.

Cool, will drop you a PM

joey100

Just to update this, few bits sold. Tiagra cranks, front derailleur, seat post and bars sold to boomdocker. Garmin 500 sold to helimachoptor.

Still left are FSA Gossamer cranks, 3x outfront mounts, valve extenders and disc chuck. I've found a set of 38cm Alu bars from my wifes old bike at home too. Need to strip off the marks from the old bar tape but 10 euro for this. Not new but in good condition, where swapped out for a set of Zipp bars after around 1 year of light use.

devonp

what BB is the fsa crankset for ? & do you still have the SRAM packaged outfront mount?

joey100

Hey Devon,

FSA crankset is a BB30. Came off a brand new Cannondale super six evo, 0 miles, didn't even cycle it down the road.

Still have the packaged outfront mount. 10 euro but would need to meet up at some stage, with cost of posting not worth it really.

devonp

ok that crankset would fit a PF30 BB also correct ?

joey100

Quick Google says you can, crank can be used with either bb30 or pf30, just the bottom bracket is different. But I wouldn't like to say for 100% just incase it doesn't. it's only ever been in a bb30 frame and I don't own a pf30 frame to check. Maybe best to ask your LBS

Underpinner

I’ll take the outfront mount - the one in packaging-for the asking, if you still have it....

joey100

Sorry just sold to devonp tonight. Still have 2 not in packaging if that's any good to you.

joey100

I'm all over the place, it actually sold to timbel tonight who initially offered asking.