Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

oil to geo thermal

  • 24-08-2017 9:06am
    #1
    Registered Users, Registered Users 2 Posts: 832 ✭✭✭


    Hi All,
    I have an oil heating system. No zones. Once the oil is on it is heating the water and rads. Rads are on thermostatic valves.
    The boiler is from the 80's. So was thinking renewing it for a modern more efficient boiler but then got thinking of geo thermal.
    My question is can I swap the oil boiler for a geothermal heat pump? I have the ground to work either a horizontal or vertical collector.
    What are the pros and cons of my idea?
    Thanks


Comments

  • Moderators, Home & Garden Moderators Posts: 6,378 Mod ✭✭✭✭Wearb


    Its unlikely that you will be able to use geothermal alone with rads. These low temperature heat sources work best with under floor heating and a high level of insulation and airtightness.

    Please follow site and charter rules. "Resistance is futile"



  • Registered Users, Registered Users 2 Posts: 366 ✭✭cruiser202006


    Your going to have to put in bigger rads if you go with geothermal. Other option is a high temperature air source heat pump like a panasonic or hitach do a split system which can get up to 80 degrees Both still very efficient. Although if your rads are from the 80's you could probably do with replacing them anyway.


  • Hosted Moderators Posts: 3,496 ✭✭✭DGOBS


    Firstly...spend your money on isolation, then a bit of insulation...some more insulation..and when you can't insulate any more, then look at your boiler and zoning your system.

    No point in having an ultra efficient system, but the house is bleeding all the heat away.


  • Registered Users, Registered Users 2 Posts: 832 ✭✭✭studdlymurphy


    Insulation is being done at the minute and airtightness is done as far as I am willing to go. All the doors and windows were done last year I rewired most of the lights and sealed an insulated box above each I have sealed the conduits leading to all sockets and comms ports. Think I'm pretty good that way. Walls are all pumped and there will be 400mm of wool in the attic in the coming weeks. Probably won't take much to heat the place over the winter this year I hope.


  • Registered Users, Registered Users 2 Posts: 50 ✭✭Couchpotato82


    Upgrade boiler and zone system into 3 separate zones. €5k or thereabouts depending on whether DHW cylinder needs to be upgraded or not. Heat pump won't give you the same return on investment in my opinion.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 832 ✭✭✭studdlymurphy


    The pipes are all in the concrete floor it would be a big ripping job to change them so would prefer to avoid. I could possible run a 2 zone system to the rads and hot water think it was suggested here before and I liked the sound of it then.


Advertisement