HUGE SALE: Parts, Gear, AEGs, GBBs, Project Guns.

Brontosaurus

I'm trying to clear out all my old gear; some RIFs are fully working, some need work, some are parts. I'll keep it brief, but if you want extra info just ask. Also some bits and bobs thrown in. Photos to follow.

========================================
KWA MP9

Fully Working, Well used but in good condition and fully functional. Comes with Suppressor, 4 Mags and 2x Flyye Double P90 Mag Pouch. One mag doesn't lock on empty due to follower, can be replaced easily. Have replaced disconnector and hammer in the past as they wore out from use. Some spare valves. 320 FPS (temp dependent) 200 Euro.

=========================================
Tokyo Marui Foliage Warrior

Fully working, Used but in good condition, only issue is that mag catch spring is weak, can drop mags on you if press it accidentally. Bought Secondhand, previous owner fitted custom black slide, but comes with original. Lost original MEU mag, comes with TM 50 rounder instead. Some spare parts. 300 FPS 150 Euro

==========================================
VFC/Cybergun FNX 45

Working, well used, good bit of wear. Only issue is missing spring holding hop chamber to barrel, but doesn't seem to change function. Has loose fitment due to extensive use. Some spare parts. Bladetech (for real steel) FNX 45 Belt Holster with cutout for RMR, retails 50e new. 328 FPS (gas/temp dependent). 100 euro.

=========================================
Army L85a1

Ancient gun, but still works, only issue is that it sometimes locks on semi (common issue with airsoft L85s, and has low FPS from being in storage for years). Comes with original Hicap, wired to deans. 270 FPS Good candidate for a project gun, just needs the semi issue fixed, and good shim and airseal job. 80 Euro

==========================================
G&G SIG SG550

Project gun: still fires, but has loads of internal and external issues. Wiring needs to be redone, can't go back to orignal gold plates Barrel is wobbly, lost one of the screws holding it in place Receivers can wobble a fair bit (can be fixed) Gastube bettery housing had to be cut up to allow deans connectors and larger batteries (can't see from outside). Doesn't have innerbarrel (used for something else) and hop unit not installed. Screws holding grip to receiver are stuck and allen heads are partially stripped (not sure how to remove them). Scratches and wear on externals. Comes with scope mount, 2 G&G hicaps, 2 TM short hicaps and original locap. Was firing at 320 FPS when it was functioning last. Either a project gun or lots of spare parts. 150 euro.

================================
2x WE G39c (G36) GBBR

One functional G36c, one is missing some internal parts but has all externals and could be made to work again. The functional G36c has issues, won't cycle properly with some mags, can be temperamental. If you know GBBRs you'll be able to get it working with all the spare parts. Working G36 has RA-Tech Steel trigger group and NPAS Additional NPAS included 6 Leak Free mags FPS variable with NPAS Project Guns 300 Euro (Mags alone cost 50 euro each, steel trigger group costs 70 euro).

==========================================
A&K SR 25 Parts

Receiver, Barrel, Gasblock, Tube and Suppresor, Pistol Grip, all covered in crappy paint Gearbox, piston has adapter to shortstroke it, allows standard V2. gears and piston. Wiring needs to be replaced (connectors cut for other projects). Will throw in M16 stock that has no tabs to connect to receiver (can attack but will be lose). Will throw in whatever bits and bobs I can find that would be useful. 3 Hicap Mags 30 euro

==========================================
Assortment of Hop Units, Rubbers, Buckings
Mix of different brands, all parts and units for M4s, 5 hop units
20e
==========================================
MAG 130rd Short/VN style M4 Midcaps x7
Scrapped my DMR Build, no need for these, used for 2 skirmishes
20euro
==========================================
CYMA SVD Midcap Mags x2
Got them for my A&K SVD, not compatible.
15 euro.
==========================================
ACM Black Mesh Half-Face Mask
10 euro
=========================================

Paypal and Postage costs not included, reasonable offers welcome, can do a deal for multiple items. Can do collection in South Wicklow Area, can meet at SpecOps in Roundwood.

Machine gunner

Brontosaurus wrote: »

I'm trying to clear out all my old gear; some RIFs are fully working, some need work, some are parts. I'll keep it brief, but if you want extra info just ask. Also some bits and bobs thrown in. Photos to follow.

========================================
KWA MP9

Fully Working, Well used but in good condition and fully functional. Comes with Suppressor, 4 Mags and 2x Flyye Double P90 Mag Pouch. One mag doesn't lock on empty due to follower, can be replaced easily. Have replaced disconnector and hammer in the past as they wore out from use. Some spare valves. 320 FPS (temp dependent) 200 Euro.

=========================================
Tokyo Marui Foliage Warrior

Fully working, Used but in good condition, only issue is that mag catch spring is weak, can drop mags on you if press it accidentally. Bought Secondhand, previous owner fitted custom black slide, but comes with original. Lost original MEU mag, comes with TM 50 rounder instead. Some spare parts. 300 FPS 150 Euro

==========================================
VFC/Cybergun FNX 45

Working, well used, good bit of wear. Only issue is missing spring holding hop chamber to barrel, but doesn't seem to change function. Has loose fitment due to extensive use. Some spare parts. Bladetech (for real steel) FNX 45 Belt Holster with cutout for RMR, retails 50e new. 328 FPS (gas/temp dependent). 100 euro.

=========================================
Army L85a1

Ancient gun, but still works, only issue is that it sometimes locks on semi (common issue with airsoft L85s, and has low FPS from being in storage for years). Comes with original Hicap, wired to deans. 270 FPS Good candidate for a project gun, just needs the semi issue fixed, and good shim and airseal job. 80 Euro

==========================================
G&G SIG SG550

Project gun: still fires, but has loads of internal and external issues. Wiring needs to be redone, can't go back to orignal gold plates Barrel is wobbly, lost one of the screws holding it in place Receivers can wobble a fair bit (can be fixed) Gastube bettery housing had to be cut up to allow deans connectors and larger batteries (can't see from outside). Doesn't have innerbarrel (used for something else) and hop unit not installed. Screws holding grip to receiver are stuck and allen heads are partially stripped (not sure how to remove them). Scratches and wear on externals. Comes with scope mount, 2 G&G hicaps, 2 TM short hicaps and original locap. Was firing at 320 FPS when it was functioning last. Either a project gun or lots of spare parts. 150 euro.

================================
2x WE G39c (G36) GBBR

One functional G36c, one is missing some internal parts but has all externals and could be made to work again. The functional G36c has issues, won't cycle properly with some mags, can be temperamental. If you know GBBRs you'll be able to get it working with all the spare parts. Working G36 has RA-Tech Steel trigger group and NPAS Additional NPAS included 6 Leak Free mags FPS variable with NPAS Project Guns 300 Euro (Mags alone cost 50 euro each, steel trigger group costs 70 euro).

==========================================
A&K SR 25 Parts

Receiver, Barrel, Gasblock, Tube and Suppresor, Pistol Grip, all covered in crappy paint Gearbox, piston has adapter to shortstroke it, allows standard V2. gears and piston. Wiring needs to be replaced (connectors cut for other projects). Will throw in M16 stock that has no tabs to connect to receiver (can attack but will be lose). Will throw in whatever bits and bobs I can find that would be useful. 30 euro

==========================================
Assortment of Hop Units, Rubbers, Buckings
Mix of different brands, all parts and units for M4s, 5 hop units
20e
==========================================
MAG 130rd Short/VN style M4 Midcaps x7
Scrapped my DMR Build, no need for these, used for 2 skirmishes
20euro
==========================================
CYMA SVD Midcap Mags x2
Got them for my A&K SVD, not compatible.
15 euro.
==========================================
ACM Black Mesh Half-Face Mask
10 euro
=========================================

Paypal and Postage costs not included, reasonable offers welcome, can do a deal for multiple items. Can do collection in South Wicklow Area, can meet at SpecOps in Roundwood.

Offer asking on sr25 parts
Will pay postage and paypal fees

ajeganwalsh21

Offer asking on the SR-25 bits and the VN mids.

Brontosaurus

Machine gunner wrote: »

Offer asking on sr25 parts
Will pay postage and paypal fees

Done, PM me when ready Forget to mention comes with 3 hicaps.

Brontosaurus

ajeganwalsh21 wrote: »

Offer asking on the SR-25 bits and the VN mids.

Sorry Machine Gunner was first, can still do the VN mids caps?

Machine gunner

Brontosaurus wrote: »

Done, PM me when ready Forget to mention comes with 3 hicaps.

Perfect sent pm der

ajeganwalsh21

Brontosaurus wrote: »

Sorry Machine Gunner was first, can still do the VN mids caps?

Grand, I might be going to spec ops at the weekend, failing that how much is postage?

Brontosaurus

ajeganwalsh21 wrote: »

Grand, I might be going to spec ops at the weekend, failing that how much is postage?

An Post website says 8 euro, that alright?

ajeganwalsh21

Brontosaurus wrote: »

An Post website says 8 euro, that alright?

Do rightly, paypal ok?

richie231069

Hiya if the Vietnam mid caps are not sold asking offered.

Brontosaurus

ajeganwalsh21 wrote: »

Do rightly, paypal ok?

Perfect, PM away when ready.

Brontosaurus

richie231069 wrote: »

Hiya if the Vietnam mid caps are not sold asking offered.

If offer falls through they're yours

Brontosaurus

bump

Chrishw105

Does the FNX45 have the spare mag?

Brontosaurus

Chrishw105 wrote: »

Does the FNX45 have the spare mag?

Cones with one Mag as it comes new

xbstkx

How much for the WE G36 with some missing internal parts? Just need the one.

Mt Baldo

Can you post pics of the FN pistol?

Chrishw105

I'll offer €90 for the FNX

ajeganwalsh21

Have you got pics of the SiG?

Brontosaurus

Sorry lads was away.

Tokyo Marui MEU 1911 dropped to 125 euro.

I think I'll hold on to the FNX for now, I'd rather sell the all of the G36 GBB stuff together, no sense in me keeping some of it.

SIG 550 is working now, but still needs work. Used it last weekend, shoots fine but at low FPS and ROF. Only inner barrel I had around was too long, so stick out the barrel, I used a suppressor. Iron sights in photo are removed to accommodate my optic, will reinstall them. Still a fixer upper. Shoots under 1J, wasn't told exact FPS.

ajeganwalsh21

I can offer 100 plus P&P for the SiG, my buddy has a somewhat strict budget.

Brontosaurus

ajeganwalsh21 wrote: »

I can offer 100 plus P&P for the SiG, my buddy has a somewhat strict budget.

Sorry won't go lower than 150.

Brontosaurus

bump

RobertJR

Is the l85 still available..?
Regards

Brontosaurus

RobertJR wrote: »

Is the l85 still available..?
Regards

It is yeah

RobertJR

Brontosaurus wrote: »

It is yeah

OK, thanks for the quick reply..
I'll be back to you thanks

RobertJR

RobertJR wrote: »

OK, thanks for the quick reply..
I'll be back to you thanks

Offer asking of 80 on l85
Regards
Rob

RobertJR

offer asking of the 80 for the l85..?

kw1985karl

Hey, are you in special ops tonight and can you do 5 on the mask?
Thanks

Brontosaurus

l85 going for 50 due to not functioning properly after testing before shipment. Robert is still happy to take it. I test all the RIFs I sell before posting, will now check all I have for sale for function.

Won't be specops tonight I don't think, but will be Sunday, 5e collected no problem.

RobertJR

Brontosaurus wrote: »

l85 going for 50 due to not functioning properly after testing before shipment. Robert is still happy to take it. I test all the RIFs I sell before posting, will now check all I have for sale for function.

Won't be specops tonight I don't think, but will be Sunday, 5e collected no problem.

PayPal funds sent for L85
Regards
Rob

CDAG27

What's left?

Brontosaurus

Everything except l85 and those crossed off in OP

RobertJR

To say I'm pleased is an understatement...
Just up (I'm on night shift) to find my lovely new L85 waiting for me after arriving..
Thanks very much
Gun is in excellent condition, better than I hoped
An absolute pleasure doing business..
Much regards
Rob

Brontosaurus

No worries at all Rob

That's the SR-25, M4 mags and L85 sold. Everything else is still for sale.

Brontosaurus

Bump

Brontosaurus

bump

ajeganwalsh21

Would you have any interest in trading the WE G39s and the MP9 for a Real Sword Type 97?

mccullybrendan

180 euro for mp9??

Brontosaurus

Sorry was away lads. Sorry not interested in a t97, but thanks for the offer.

180 is too low for the mp9.

UPDATE:

The WE G39 is acting up on me, it's not cycling consistently.I replaced nozzle springs and took apart the trigger group, it's better but it's still having issues.

Price drop to 200 euro.

mccullybrendan

Brontosaurus wrote: »

Sorry was away lads. Sorry not interested in a t97, but thanks for the offer.

180 is too low for the mp9.

UPDATE:

The WE G39 is acting up on me, it's not cycling consistently.I replaced nozzle springs and took apart the trigger group, it's better but it's still having issues.

Price drop to 200 euro.

Ok i will do 200 pm me

Brontosaurus

200 accepted for the MP9, to PMs.