Painting laminate fireplace

briancarr82

Hi all, have a laminate fireplace surround I'm looking to paint. Is best process to sand lightly, bin primer then satinwood f
or finish?

briancarr82

can anyone help?

Ceepo

briancarr82 wrote: »

Hi all, have a laminate fireplace surround I'm looking to paint. Is best process to sand lightly, bin primer then satinwood f
or finish?

Give it a good wash down first in case there is and type of residue from house hold cleaner that may contain wax products.

Bin primer should be fine or you cold also use Colourtrend prime 2 (epoxy)
Then your satinwood finish should be fine.

briancarr82

What bin primer should i use? There's a shellac one and a water base one? then should it be oil or water based satinwood? Cheers for help :-)

Ceepo

briancarr82 wrote: »

What bin primer should i use? There's a shellac one and a water base one? then should it be oil or water based satinwood? Cheers for help :-)

There is only 1 Bin primer (shellac). 123 primer is water-based.
Johnstones do there own version of it as well and it's a bit cheaper.
I find the colourtrend prime 2 very very good. It's easier to apply that Bin but it is slower to dry.

If you are putting on a colour I would go with Colourtrend water-based satin wood. If you are going with white my preference would be oil based as I don't like to look of white water based satinwood it that's just my opinion

briancarr82

Thanks very much. Is it very thick is that what you mean by hard to apply? will one quote of primer do? yeah it will be a grey colour going on as final coat. Here's a pic on fireplace. Will one coat of primer do?

Ceepo

briancarr82 wrote: »

Thanks very much. Is it very thick is that what you mean by hard to apply? will one quote of primer do? yeah it will be a grey colour going on as final coat. Here's a pic on fireplace. Will one coat of primer do?

It's not that it's thick. It dries very quick,so when you are brushing it on it can 'pull' easy if its over brushed.

One coat of primer is fine as I will still need at least 2 coats of Satinwood

RebelButtMunch

Does it get hot? Don't paint it if it does. Your house will smell like chemicals. Speaking from experience.

briancarr82

timber doesn't get that hot, would be warm alright but not "hot"

a few neighbours have done the same thing and would have similar surrounds.

PANDDDKP

Do as Ceepo said, the only things I will add is

i) Do not sand beforehand, it's laminate (plastic) so it will tear up and look crap

ii) I would use Colourtrend Prime 2 as opposed to the BIN, the BIN is meth based and it has a strong smell, plus it will wreck your brush after 1 go. The Colourtrend is waterbased so you can wash the brush out with water and use again on your top coat if it too is waterbased. Also the colourtrend smell is only slight.

1 coat of primer will be fine, followed by 2 or 3 top coats. You can lightly sand betwee coats with a sanding block, grade 180 or so, and the reason is you won't be sanding the laminate, just the paint/ brush strokes.

Wyldwood

Ceepo wrote: »

There is only 1 Bin primer (shellac). 123 primer is water-based.
Johnstones do there own version of it as well and it's a bit cheaper.
I find the colourtrend prime 2 very very good. It's easier to apply that Bin but it is slower to dry.

Sorry to hijack the thread but I'm about to paint a lot of varnished mahogany doors and thought BIN was the thing to use but I've been told it smells very strongly. Do you have to sand before using the Colortrend prime 2 or is it like the BIN and not much sanding required? Sounds like a better product.

Ceepo

Wyldwood wrote: »

Sorry to hijack the thread but I'm about to paint a lot of varnished mahogany doors and thought BIN was the thing to use but I've been told it smells very strongly. Do you have to sand before using the Colortrend prime 2 or is it like the BIN and not much sanding required? Sounds like a better product.

Prime 2 doesn't require much sanding. But it does take longer to dry than Bin.
While there is a stronger smell for bin primer it doesn't like linger that long.

Lekrub

bump....I'm looking to do this to a mantle piece this week. Going from dark laminate to white. Did you go ahead with it after?