Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

slurry tanker - maintenance

  • 04-01-2017 1:49pm
    #1
    Registered Users, Registered Users 2 Posts: 4,735 ✭✭✭


    I bought a 2nd tanker in the autumn. Its a 2010 Plated 1800G Redrock and did very little work I knew the last owner and it didn't empty 9 bays of slurry a year.

    what other maintenance does a tanker & pump need?

    I remember an old Mod on here use to wash the pump out with tractor diesel.

    The oil is self feed to the pump so I do dip it each day that I use it .

    Do many of on here open up the back, wash it out and repaint the inside?


Comments

  • Registered Users, Registered Users 2 Posts: 30,217 ✭✭✭✭whelan2


    I bought a 2nd tanker in the autumn. Its a 2010 Plated 1800G Redrock and did very little work I knew the last owner and it didn't empty 9 bays of slurry a year.

    what other maintenance does a tanker & pump need?

    I remember an old Mod on here use to wash the pump out with tractor diesel.

    The oil is self feed to the pump so I do dip it each day that I use it .

    Do many of on here open up the back, wash it out and repaint the inside?
    Dont climb into the tank, we made up a long hoe type thing for taking stomes out the back of tanker. We have ours 6 years and never got into to it yet, the gases inside it are lethal


  • Registered Users, Registered Users 2 Posts: 4,735 ✭✭✭lakill Farm


    whelan2 wrote: »
    Dont climb into the tank, we made up a long hoe type thing for taking stomes out the back of tanker. We have ours 6 years and never got into to it yet, the gases inside it are lethal

    Id agree with you on not getting inside yet I have seen at least half dozen adverts with lads getting in and out of tanks.

    would you ever wash it out with a few loads of water/?


  • Registered Users, Registered Users 2 Posts: 30,217 ✭✭✭✭whelan2


    Id agree with you on not getting inside yet I have seen at least half dozen adverts with lads getting in and out of tanks.

    would you ever wash it out with a few loads of water/?
    I remember years ago we lifted the tanker up on front of digger and put wash down hose from parlour in through the side filler at the front and it blew all the stones and sand out the back. You'd want to be doing a fair bit of work to need to wash it out


  • Closed Accounts Posts: 492 ✭✭The Cuban


    Never cleaned the inside of mine out yet, have it 12 years, bought 2nd hand but in good condition. Its still as good as the day I bought it.
    I flush it out with a tank of water after using it, keep the pump oil topped up if needed.
    When finished using at the end of the year I completely clean/ powerhose the ouside, wheels etc again I just flush out the inside with water, fill and empty twice. Leave it blowing away for a couple of minutes to dry it out. Then get a half gallon of diesel and suck it up through the pump and discharge again.
    Wait for a dry day then put it away for the winter


  • Registered Users, Registered Users 2 Posts: 60 ✭✭lookinghere


    I bought a 2nd tanker in the autumn. Its a 2010 Plated 1800G Redrock and did very little work I knew the last owner and it didn't empty 9 bays of slurry a year.

    what other maintenance does a tanker & pump need?

    I remember an old Mod on here use to wash the pump out with tractor diesel.

    The oil is self feed to the pump so I do dip it each day that I use it .

    Do many of on here open up the back, wash it out and repaint the inside?
    They don't give trouble normally. If you buy a fresh one. Check the pump for oil. If your really fussy you could wash the inside of the tank.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 607 ✭✭✭larthehar


    Neighbours of mine refurbished their 1800gallon hispec.. was 20yrs old.. had breathing apparatus so got inside and sandblasted and sprayed..
    We have our ruscon since the 80s, used only for water.. got in to shovel sand out of it a few times.. grand as sand was wet..


  • Closed Accounts Posts: 615 ✭✭✭Boaty


    If anyone intends to get in, fill it up to the top with water first, it will push all the gases out.


  • Closed Accounts Posts: 16,768 ✭✭✭✭tomwaterford


    Boaty wrote: »
    If anyone intends to get in, fill it up to the top with water first, it will push all the gases out.

    Have someone there to pull you out....just in case


  • Registered Users, Registered Users 2 Posts: 223 ✭✭mythos110


    Or buy a Rossmore. They have a large back door which makes it much safer! There is little chance of gases being present if you leave the door open for a while and getting someone out in the unlikely event of an issue is much easier!


  • Registered Users, Registered Users 2 Posts: 831 ✭✭✭satstheway


    If it's washed out twice after each slurry application I don't see where the gas will come from?
    Ours is a galvanised tank and she get a clean inside every year.


  • Advertisement
Advertisement