HKC 1070 3 Lights Flashing

PSXDupe

Guys

I have a HKC 1070 and the green, yellow & red lights are flashing however there is no fault showing.

If you go into Engineer Mode and come out, "No Faults Found".

Any ideas what this is.

mickjohnlong

Do you have any RF Keyfobs? If you do try replacing the batteries in them.

PSXDupe

mickjohnlong wrote: »

Do you have any RF Keyfobs? If you do try replacing the batteries in them.

No, no RF Fob, all wired with the exception of 1 wireless shock/contact sensor.

fred funk }{

Have you tried entering your code?

PSXDupe

fred funk }{ wrote: »

Have you tried entering your code?

Yes, no faults.

Entered Engineer mode and exit, "No Fault Found". Also check in Engineer mode, show system fault, again, "No Fault Found"

Mobile app working fine, so I don't think it's comms related. Also turn off mains, alarm picks up the main fault, restored power and all light still flashing so I don't think it's main related either.

I'm thinking maybe a faulty keypad.

Alarm seems to be working 100% other than the lights flashing, arming, disarming etc

fred funk }{

PSXDupe wrote: »

Yes, no faults.

Entered Engineer mode and exit, "No Fault Found". Also check in Engineer mode, show system fault, again, "No Fault Found"

Mobile app working fine, so I don't think it's comms related. Also turn off mains, alarm picks up the main fault, restored power and all light still flashing so I don't think it's main related either.

I'm thinking maybe a faulty keypad.

Alarm seems to be working 100% other than the lights flashing, arming, disarming etc

When you enter your user code what happens on the keypad?

PSXDupe

Everything works as normal.

Enter personal code, arms and disarms as normal.
Engineer code, enters engineer mode, no errors, just into service menu.
Quick Codes work as they should

PSXDupe

Piece of useful information

The issue is as follows, if for some reason you press the REC button and they press any other button before leaving message.
Sometimes the alarm get into a messed up state, everything is working 100%, all light start flashing.

Solution, simple press the REC for 2 second, left go, then press PLAY.

Problem sorted.

fred funk }{

Thanks for letting us know.

hoanymole

https://www.boards.ie/discussion/comment/102021956#Comment_102021956

Legend - thank you! Worked for me.

KoolKid

Yes. If you record a message the 3 lights flash to let you know there's a message waiting to be listened to. A feature that never took off. I'm surprised HKC have not removed it in newer models.

altor

It beeps now as opposed to the 3 flashing lights.