Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Mira elite 2 (tank fed) shower dribbling

  • 15-06-2016 3:42pm
    #1
    bonzodog2
    Registered Users, Registered Users 2 Posts: 6,284 ✭✭✭


    i.e low output, not a leak. Low flow light is on.
    Does it have a filter on the input side that might be clogged?
    I know its old, looked on ebay and saw a filter for a different model
    Or would worn brushes cause it? There's quite a bit of brush dust on the inside.


Comments

  • #2
    Sleeper12
    Registered Users, Registered Users 2 Posts: 17,189 ✭✭✭✭Sleeper12


    bonzodog2 wrote:
    i.e low output, not a leak. Low flow light is on. Does it have a filter on the input side that might be clogged? I know its old, looked on ebay and saw a filter for a different model Or would worn brushes cause it? There's quite a bit of brush dust on the inside.


    The filter in these just need to be cleaned its not a part you would replace unless it got damaged. If you have good flow going to the shower and the filter has been cleaned it's most likely the motor or brushes in the motor. A new motor is around 130 Euro just to buy. A reconditioned motor around 60 Euro or brushes around 25 Euro


Advertisement