Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

5 o clock Click

  • 13-03-2016 8:21pm
    #1
    Registered Users, Registered Users 2 Posts: 4,368 ✭✭✭


    I'm getting a slight click or knock in the bike when my non drive side pedal goes through 5 o clock while climbing or putting a bit of power down on the flat. BB bearings are OK so I'm thinking it's either the pedal or the bearing cup ( press fit BB)
    Any other ideas?


Comments

  • Registered Users, Registered Users 2 Posts: 12,863 ✭✭✭✭crosstownk


    If your using clipless pedals then pedal with one foot out to determine which side is at fault - if it happens with either foot unclipped then it's unlikely to be a pedal.

    If you still think it's a pedal, then have you a spare pair or could you borrow a mates pair for a few hours just to test? I've spare pair of well used Shimano PDR540 (SPD-SL) that you can borrow if you like.


  • Registered Users, Registered Users 2 Posts: 13,763 ✭✭✭✭Inquitus


    Let the clicking go......if you allow it to take hold of you you may well lose your sanity trying to figure out where it's coming from....


  • Registered Users, Registered Users 2 Posts: 1,100 ✭✭✭clog


    Are you in the big front ring at the time ? , if so it may be the drive side crank clipping the front mech/cable.


  • Registered Users, Registered Users 2 Posts: 2,874 ✭✭✭Zyzz


    Take one foot off the pedal, and rotate it a few times, then when you look down again




    you're looking at your keyboard and buying a new bike. Problem solved.


  • Registered Users, Registered Users 2 Posts: 4,368 ✭✭✭Daroxtar


    It happens in big ring and small. Also happens both seated and out of saddle. If I rotate the pedals without putting downward pressure, ie pulling up on them, it doesn't happen but as soon as I press on them it happens.

    I have an old pair of pedals, I'll switch them tomorrow and see if it makes any difference.

    If that doesn't work I'll probably start looking at a new bike ;)


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 25,038 ✭✭✭✭Wishbone Ash


    Also clean the front wheel skewer and put a bit of oil/grease on the front drop outs. Sometimes they can be the cause of noise as the forks can contort slightly when climbing.


  • Moderators, Sports Moderators Posts: 25,531 Mod ✭✭✭✭CramCycle


    Clean and regrease the headset, clean and tighten the cranks, put on different pedals to see does it still happen, loosen and tighten the clamp on your handlebars, check that the cable on your derailleur isn't clipping your shoes/toes etc., regrease everything else, loosen and grease and retighten the saddle rails, make sure the bolts on your chainrings are tightened properly, make sure the downward force isn't moving the crank slightly and clipping the derailleur.

    Buy a new bike.

    Put your old one in the shed.

    Take it out in 6 weeks to find that the click isn't there anymore.


  • Registered Users, Registered Users 2 Posts: 513 ✭✭✭Cond0r


    Also clean the front wheel skewer and put a bit of oil/grease on the front drop outs. Sometimes they can be the cause of noise as the forks can contort slightly when climbing.

    Grease *in* the drop outs? :eek:

    That's the one place you absolutely don't want movement, I'd have thought. One of my worst nightmares is loose QR levers causing the wheel to pop out on a descent.


Advertisement