Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Danfoss RX2C wireless controller

  • 12-12-2015 2:42pm
    #1
    Effects
    Registered Users, Registered Users 2 Posts: 9,760 ✭✭✭


    I'm trying to sort out a heating problem and looking for advice.
    It's a two channel Danfoss controller. Downstairs stat for the heating and cylinder stat that controls cylinder and two bathroom towel rails. The circuit for the cylinder/rails seems to be switching on and staying on. When I turn down the stat it sends the signal to the controller but the light stays on and keeps the boiler switched on heating the coil/rails.
    I've switched out the controller but same thing is happening.

    Has anyone come across this before? As it's a wireless stat on the cylinder and it's in the hotpress with the controller can I just replace it with a mechanical stat to control the minivalve and aux control for the boiler.

    Any help is much appreciated.


Comments

  • #2
    Calahonda52
    Registered Users, Registered Users 2 Posts: 12,888 ✭✭✭✭Calahonda52


    Not familiar with that particular rig but is the mini valve acting up?

    “I can’t pay my staff or mortgage with instagram likes”.



  • #3
    K.Flyer
    Registered Users, Registered Users 2 Posts: 8,565 ✭✭✭K.Flyer


    Have you tried a full re-set and re-pairing the stats with the controller?


  • #4
    Effects
    Registered Users, Registered Users 2 Posts: 9,760 ✭✭✭Effects


    Calahonda52 wrote: »
    Not familiar with that particular rig but is the mini valve acting up?

    Yeah, turned out to be the minivalve as well as the controller staying on.
    K.Flyer wrote: »
    Have you tried a full re-set and re-pairing the stats with the controller?

    Yeah, did a re-pairing and the controller still gave trouble. Changed controller which fixed that end of it. Mini valve was staying on too so that was a second problem to locate.


Advertisement