Satellite dish setings

cry5t41

Hi Guys

I have this set,

1. Single 6° Twin Monoblock LNB
2. 90cm Satellite Dish
3. Openbox v8

I would like to set this first for Hotbird. On this page (dishpointer.com) I was check settings for Celbridge. Could you please verify that my settings are correct?

Satellite Data:
Name: 13E EUTELSAT 3C | EUTELSAT HOT BIRD 13B | EUTELSAT HOT BIRD 13C

Dish Setup Data:
Elevation: 26.5°
Azimuth (true): 156.1°
Azimuth (magn.): 159.8°
LNB Skew [?]: -14.0°

regards
cry5t41


I just notice, this is in wrong section. Is any moderator can move my thread to "Foreign Satellite" section?

STB.

If dishpointer says its correct then its correct!

Basically your dish arm will be pointing at approx. 16E and the LNBs either side will pointing at 19E and 13E.

Both are very strong satellites so if your openbox is pretuned just lash it on Rai 1 on 13E and you can fine tune it using the TV. Arte on 19E is another one for tuning.

Or use a meter.

cry5t41

Thank you. I have satellite finder I will try this in weekend. I hope weather allows me to do that

cry5t41

STB. wrote: »

Arte on 19E is another one for tuning. Or use a meter.

One question, how can I tune my tuner to see Arte without dish configured ?

Should I use some settings from this page and then input manual some values to channel ?

lyngsat.com/tvchannels/it/Rai-1.html

Oscarziggy

Arte on 19E ... 12.402 V 27500. and is FREE TO AIR.
Hope this helps .
Regards

cry5t41

Thank you guys for help.

I've set my dish to SKY and I happy with that. Maybe later I will move my dish to astra1 and hotbitd