Euro Spec Door Handles

paul1982a

Hopefully someone here could maybe help me....On an internal door the door latch is no longer working and im trying to remove door handles too see what the problem is. The handles are an 'ES' Type I believe Euro Spec with a rose faceplate with no visible screws. Underneath the handles I found a small nut and removed with a allen key. I thought the handle would simply pull off but it is not. I have tried knocking / tapping with hammer etc but it seems to be fixed..can anyone offer any advise...all appreciated.

wait4me

Have you tried unscrewing the faceplate?

moonshadow

The plate should twist off anti clockwise , remove the screws in to the door then remove the grub screws on the underside.

paul1982a

moonshadow wrote: »

The plate should twist off anti clockwise , remove the screws in to the door then remove the grub screws on the underside.

Thank you for reply's... will try this....there is a small cut out in the base of roseplate and ive been trying to just prise plate off with a screwdriver with no success maybe screw off is the answer..

paul1982a

paul1982a wrote: »

Thank you for reply's... will try this....there is a small cut out in the base of roseplate and ive been trying to just prise plate off with a screwdriver with no success maybe screw off is the answer..

What im i doing wrong!! The plate seems fixed wont budge but i wont be able to srcew this off until I have removed the handle is this correct? But the handle still wont release even though I removed the small nut in lever can anyone advise??

massy086

paul1982a wrote: »

What im i doing wrong!! The plate seems fixed wont budge but i wont be able to srcew this off until I have removed the handle is this correct? But the handle still wont release even though I removed the small nut in lever can anyone advise??

Can u post a picture

paul1982a

massy086 wrote: »

Can u post a picture

Massy cant as apprantly new users cant post pics? anyhow if you google eurospec curved handle it will be the first image with a round rose with no visible screws on it...there is no faceplate as such to these handles with circular rose

colm_mcm

Is it this one
https://www.alldoorhandles.com/Eurospec-CSL1193-SSS-and-BSS-Curved-Lever-Door-Handle-on-Round-Rose.html

It says

Fully Sprung Lever Door Handle with Push on Rose

Maybe if you stuck something like a pick into the hole at the bottom, the washer-type plate that seems to be sitting in there will come out revealing the screws
I would have thought it'd just unscrew though. Use a rubber glove to get more grip. Or try some of your other doors to see if this is how they come off.

Hecklar

The circular collar on those just unscrews to reveal mounting screws underneath.

massy086

paul1982a wrote: »

Massy cant as apprantly new users cant post pics? anyhow if you google eurospec curved handle it will be the first image with a round rose with no visible screws on it...there is no faceplate as such to these handles with circular rose

Yes the circular peice will twist off counter clock wise. If you have a vicegrips and a cloth maybe try it that way to get a start on it. Hope you get it off.

paul1982a

massy086 wrote: »

Yes the circular peice will twist off counter clock wise. If you have a vicegrips and a cloth maybe try it that way to get a start on it. Hope you get it off.

thanks everyone for help will take another go tomorrow!