Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Assignment question regarding stereo audio

  • 14-10-2015 08:45PM
    #1
    Registered Users, Registered Users 2 Posts: 158 ✭✭


    I have to workout how much data is used to record an audio sample. simple enough stuff

    Just wondering it underlines that the type of audio being recorded is stereo. wondering does stereo use more data as i have read there is a richer sound caused by over lapping frequencies.


Comments

  • Closed Accounts Posts: 663 ✭✭✭laraghrider


    Well it depends on the quality of the audio as well.

    If you for example have 128bit compressed audio in a mono format it's single channel audio compressed to a 128bit ratio. That will be smaller than a 128bit compressed stereo stream as it has more channels (usually 2) of audio. The difference between mono and stereo is that mono is single channel audio sent to multiple speakers so each speaker plays the exact same audio at the same time. Stereo is multiple channels sending differential steams to different speakers. So channel 1 goes to speaker 1 and channel 2 goes to speaker 2, at it's simplest explanation.


  • Registered Users, Registered Users 2 Posts: 158 ✭✭Horusire


    Well it depends on the quality of the audio as well.

    If you for example have 128bit compressed audio in a mono format it's single channel audio compressed to a 128bit ratio. That will be smaller than a 128bit compressed stereo stream as it has more channels (usually 2) of audio. The difference between mono and stereo is that mono is single channel audio sent to multiple speakers so each speaker plays the exact same audio at the same time. Stereo is multiple channels sending differential steams to different speakers. So channel 1 goes to speaker 1 and channel 2 goes to speaker 2, at it's simplest explanation.

    thanks for the answer!


Advertisement