Firebird C26 Enviromax

tech

need to bleed the above, does anyone have instructions on how to bleed this boiler

thanks

Wearb

There are loads of details on this forum. I will look it up later if you haven't found it by then.

Scudo.2

It's the black allen key plug on the 3" hexagonal tube.
You need to open it to let air & oil out.
I" directly below the red reset button on the black plastic box.

Wearb

Happy to see you back Scudo

Billy Bunting

and don't be upsetting folk

Dtp1979

Wearb wrote: »

Happy to see you back Scudo

Jesus I thought it was an old thread when I saw scudos name! Good to have you Back scudo.
I wonder if there's something in the air and we'll see Shane re-appear

tech

Turn off mains
Remove red cover
Remove grub screw
Power back on
Re set fire valve if needed
Press button to prime

Replace grub screw once oil comes out

I think these are the steps?

DGOBS

Welcome back Scudo, sure I speak for everyone when I say 'it's been quiet without you!'

jimf

great to have you back haven't heard from you in ages

now that hes back we wont talk about capacitors for a while if that's ok with everybody

Wearb

http://www.boards.ie/vbulletin/showthread.php?p=95297560

Billy Bunting

Fight fight fight !!!!

Wearb

Easy tiger. None of us hold any animosity towards you, even if you did turn to the old enemy. :eek:
:pac::pac::pac::pac::pac:

jimf

Wearb wrote: »

Easy tiger. None of us hold any animosity towards you, even if you did turn to the old enemy. :eek:
:pac::pac::pac::pac::pac:[/QU OTE]

old enemy ??????

Billy Bunting

Scudo.2 wrote: »

That was Not appreciated or helpful.

Whined ya neck in scuds, it was humour, we can still have a bit of craic can't we, don't know who tickled your nuts in the past but don't be snapping at moi.

Wearb

jimf wrote: »

Wearb wrote: »

Easy tiger. None of us hold any animosity towards you, even if you did turn to the old enemy. :eek:
:pac::pac::pac::pac::pac:[/QU OTE]

old enemy ??????

I am talking about 800 years of oppression here Jim.

jimf

get your drift now

Billy Bunting

I do indeed know you from another place (as i’m sure DGOBS does)and in that place humour is encouraged, you also know me and i like to give a bit of a slagging as do you in the other place, you know what they say! Can’t take it then don’t dish it, twitchy fingered Mods are no excuse for becoming a grump. X

tech

Hi

guys no power to boiler, I dont know is it because the Fire Valve is down??

Fire Valve, does this look off?



Red Cover removed, should there be right light on the Button? if power was going to Boiler?




Thanks

Billy Bunting

High limit stat ?

Scudo.2

To op.
Try reset button under black cap on the thermostat. Next to heat dial.
Could be circulation water pump not working.

Wearb

Hang on in there Scudo. You are just getting a few friendly "shoulders", similar to a sub coming onto the pitch in a GAA match. Weather the first few minutes and then it seems like you have always been on the pitch.

tech

Do you think the firevalve looks down? from the picture?

Billy Bunting

tech wrote: »

Do you think the firevalve looks down? from the picture?

I cant open your pictures but if you have no power to the boiler your firevalve has nothing to do with it.

tech

has anyone else any ideas?

Thanks

Wearb

Have you followed Scudo's advice. If you have, what was the result?

tech

All good here now!! fix was to turn the temp up in the rooms and boiler onto Fully on on the switch and then BLEEP !!!

thanks