Hyuandai santa Fe won't rev

mk2man

Hi
I fitted a clutch to a 2.0 dohc petrol sante fe yesterday
It arrived back today running like a bag of bolts.... wouldn't drive over 60 mph
I cleaned the throttle body with carb cleaner.
cleaned the cam sensor and any other sensor I could get at to clean
After cleaning the throttle body the jeep got it hard to do 15mph.
I plugged it in to find no faults
eventually after spending a few hours at it , vehicle speed sensor code PO500 came up,
I am thinking throttle body but I remain unsure.....
Has anyone had experience with this problem before??
It seems to be choking itself up the exhaust smells like its running rich on fuel .......;

PADRAIC.M

mk2man wrote: »

Hi
I fitted a clutch to a 2.0 dohc petrol sante fe yesterday
It arrived back today running like a bag of bolts.... wouldn't drive over 60 mph
I cleaned the throttle body with carb cleaner.
cleaned the cam sensor and any other sensor I could get at to clean
After cleaning the throttle body the jeep got it hard to do 15mph.
I plugged it in to find no faults
eventually after spending a few hours at it , vehicle speed sensor code PO500 came up,
I am thinking throttle body but I remain unsure.....
Has anyone had experience with this problem before??
It seems to be choking itself up the exhaust smells like its running rich on fuel .......;

Check the crankshaft speed sensor it is probably damaged

mk2man

PADRAIC.M wrote: »

Check the crankshaft speed sensor it is probably damaged

Ok this is the sensor out behind the timing cover I guess ?

PADRAIC.M

mk2man wrote: »

Ok this is the sensor out behind the timing cover I guess ?

I think it's on the side of engine on these, near gearbox end

mk2man

PADRAIC.M wrote: »

I think it's on the side of engine on these, near gearbox end

Ok
I know there is definitely a 3 wire one in behind the timing cover, il have a look and see
Thanks

dieselbug

"Vehicle speed sensor" refers to the road speed sensor mounted on the gearbox and not to the engine speed sensor.

It or the wiring to it were probably damaged during the gearbox removal or refitting.

mk2man

dieselbug wrote: »

"Vehicle speed sensor" refers to the road speed sensor mounted on the gearbox and not to the engine speed sensor.

It or the wiring to it were probably damaged during the gearbox removal or refitting.

Yea I know where the vehicle speed sensor is located on the gearbox
Would this cause the problem of her not reving?
Thanks

crosshair1

Is it possible that youve mixed up the vss & throttle wiring plugs?
seen it before on 2.0 petrol trajet