Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Best aty for tasting/testing home-brew ejuices one after another?

  • 15-08-2015 07:57PM
    #1
    Registered Users, Registered Users 2 Posts: 1,644 ✭✭✭


    Want to start mixing my own, (after a life of rolling my own)

    Because of residual juice, it's hard to test new mixes without rebuilding every time I make a small adjustment to the mix.

    Is there an aty or hack that is better suited to testing juices one after another ( avoiding the need to continually clean out and re-wick the aty ) ?

    EDIT_ found this on youtube - Using the 306 Atomizer to test out E-Liquid looks like a good starting place.
    Found this also on youtube Easy method for trying e-liquids without rebuilding -- he uses 510 bridgeless atomizers, couldn't find any of those 306's this side of the pond.

    🧐IMHO, God wants us all to ENJOY many,many ice-creams , 🍦🍦🍦🍦🍦🍦🍦🍦🍦🍦🍦🍦



Comments

  • Registered Users, Registered Users 2 Posts: 6,026 ✭✭✭grindle


    Steel mesh builds rinses easiest, after that it's cotton with a rinse although that can waste a tiny bit more juice.


  • Registered Users, Registered Users 2 Posts: 2,555 ✭✭✭youdipstick


    dohouch wrote: »
    Want to start mixing my own, (after a life of rolling my own)

    Because of residual juice, it's hard to test new mixes without rebuilding every time I make a small adjustment to the mix.

    Is there an aty or hack that is better suited to testing juices one after another ( avoiding the need to continually clean out and re-wick the aty ) ?

    EDIT_ found this on youtube - Using the 306 Atomizer to test out E-Liquid looks like a good starting place.
    Found this also on youtube Easy method for trying e-liquids without rebuilding -- he uses 510 bridgeless atomizers, couldn't find any of those 306's this side of the pond.

    I use the 510 & 306 atty's,I did find the 306 for sale but not the 510 atty.The 306 drip tip is hard to find now,I would use the sleeve off a electrical cable or maybe something similar.Here is a video https://www.youtube.com/watch?v=czWxQZEBHx0


    http://www.bargainvapour.com/306_Bridgeless_Atomizer/p1274299_8903445.aspx


  • Registered Users, Registered Users 2 Posts: 1,644 ✭✭✭dohouch


    I use the 510 & 306 atty's,I did find the 306 for sale but not the 510 atty.The 306 drip tip is hard to find now,I would use the sleeve off a electrical cable or maybe something similar.Here is a video https://www.youtube.com/watch?v=czWxQZEBHx0


    http://www.bargainvapour.com/306_Bridgeless_Atomizer/p1274299_8903445.aspx

    Thanks for the link to Bargainvapour, bought 3 X 306 type aty,( seem to dying out these 306's ) didn't realise they had reasonable Irish postage rates.
    Thanks

    🧐IMHO, God wants us all to ENJOY many,many ice-creams , 🍦🍦🍦🍦🍦🍦🍦🍦🍦🍦🍦🍦



  • Registered Users, Registered Users 2 Posts: 2,555 ✭✭✭youdipstick


    dohouch wrote: »
    Thanks for the link to Bargainvapour, bought 3 X 306 type aty,( seem to dying out these 306's ) didn't realise they had reasonable Irish postage rates.
    Thanks

    Look for a drip tip & a drip shield cos these things can leak,never put more than 2 drops in or it will gurgle & leak,in the videos they show using 3 or 4 drops but they don't tell you about all the leaking & gurgling,just make sure it is primed before using or you will get a nasty burn taste & it is nasty,good luck with it...


  • Registered Users, Registered Users 2 Posts: 2,555 ✭✭✭youdipstick




  • Advertisement
Advertisement