KJW MK1 CARBINE 23 INCH BARREL

deathwish2

For sale , KJ Works Mark 1 Carbine Gas Sniper rifle. Comes with low scope mounts, 4x32 Swiss Arms Scope, Original Manual and Box. It has a KJ Works 23 inch barrel and inner barrel kit fitted. Shooting at 325 fps using .20g bb's on blue gas.Looking for 150 euro. No trades please, in excellent condition, never skirmished Lovely light weight rifle, very easy to carry a large secondary weapon with it. 17 round mag capacity.

deathwish2

Bump

deathwish2

Bump

deathwish2

Bump

deathwish2

Bump

deathwish2

Bump

deathwish2

Bump

deathwish2

Bump

deathwish2

deathwish2 wrote: »

Bump

Bump

xxDSOFWxx

can pick up in cork how much ya lookin for it

deathwish2

xxDSOFWxx wrote: »

can pick up in cork how much ya lookin for it

I'll do 140 if you collect ?

deathwish2

Bump

deathwish2

Price drop 140....

deathwish2

Bump

thermo

Hi, I've a couple of questions if you dont mind.
1, is there a plastic or metal hop up unit in this?
2, what's the shot to shot consistency on the chrono?
3, what inner barrel and hop up rubber are fitted?
4, has the hammer spring been shortened or is a lighter one fitted?
5, what's the grouping like (presuming you have plinked with it)?

Sorry for the awkward questions

deathwish2

thermo wrote: »

Hi, I've a couple of questions if you dont mind.
1, is there a plastic or metal hop up unit in this?
2, what's the shot to shot consistency on the chrono?
3, what inner barrel and hop up rubber are fitted?
4, has the hammer spring been shortened or is a lighter one fitted?
5, what's the grouping like (presuming you have plinked with it)?

Sorry for the awkward questions

Metal hop
Will chrono and publish exact chrono readings tomorrow evening
KJWorks longer standard inner barrel and standard hop up rubber
Standard hammer spring
Just before I put up this add I spent about 45 mins chronoing and zeroing in this rifle, it has an adjustable hop and I could have spent more time fine tuning the hop and scope, also I should have cleaned the barrel , and the heavyist bb's I had were .28's ( I reckon there is a little too much hop spin on them ) However I was still hitting a metal poll 2 inches wide over 55 feet 8 times out of ten. I have'nt had the time ( or heavier bb's ) to really see what it can do.

thermo

Thanks for the reply, couple more questions, it shoots at 325 fps with .2g bb's? And on no hop up applied it over hops the bb's still?

deathwish2

thermo wrote: »

Thanks for the reply, couple more questions, it shoots at 325 fps with .2g bb's? And on no hop up applied it over hops the bb's still?

It's very hard to tell if the hop is completely off as it's just a tiny hole you put a small Allen key into, and as I learned before on other guns with similar hop units if u over tighten u damage the rubber, and over loosen it will unthread ,so I tend only to make small adjustments. shooting .2g bb's it looks like it has too much hop , but shooting .28g bb's they fly much straighter. This is why I reckon a heavier bb would be more suitable. I had a 2 Tanaka revolvers before. Fixed hops , both shot straight with .25g bb's or heavier, and both looked over hop up'd using .20g bb's. All fps was measured with G&G .20g bb's.

deathwish2

Bump

deathwish2

Price drop 130...
Or considering trades now , gas pistols/smg's only please.

deathwish2

deathwish2 wrote: »

Price drop 130...
Or considering trades now , gas pistols/smg's only please.

Bump

deathwish2

deathwish2 wrote: »

Price drop 130...
Or considering trades now , gas pistols/smg's only please.

Bump

deathwish2

Bump

deathwish2

Can a mod make this as withdrawn please ?

thermo

done

deathwish2 wrote: »

Can a mod make this as withdrawn please ?