FS: Front tubular deep section track wheel

Caroline_ie · 13-07-2015 7:27am #1

Front 50mm carbon tubular rim, 20H with glued on Continental Sprinter tire.

Built with red Novatec hubs
Matt finish.

Used once.

€250

25sean · 10-08-2015 9:33am

Offer 150 without the tub.. Wanted for CX.. Thanks

Caroline_ie · 10-08-2015 10:19am

Hi Sean,

The wheel doesn't have skewers. It bolts onto the forks. Are you sure it would be OK?

25sean · 10-08-2015 10:26am

oh, I didnt see that... would be a concern for changes etc.. I guess its a no go so... thanks for getting back, glws

dave_o_brien · 10-08-2015 11:09am

Well, given we're all friends here (are we not?!), we could figure out something. I have a planet X carbon front wheel I use for track with a hex head bolt. If it's agreeable to everyone, I'd swap for the track wheel and you could take the planet x, and agree the cost with Caroline_ie?

25sean · 10-08-2015 12:21pm

Hi Dave, could work if all parties are happy! What model is it?

Thanks

dave_o_brien · 10-08-2015 12:31pm

Pro Carbon 50, with the "Lines" logo. Like this, except a front wheel:

kumate_champ07 · 10-08-2015 4:43pm

I can replace the axle for quick release if you like? have compatible axles for those novatec track hubs. you can also use a hacksaw on the original axle because its hollow and the quick release will fit.

the axles I have are for m6 bolts but will take a skewer

FS: Front tubular deep section track wheel

Comments