Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Benekov Wood Pellet Boiler - Thermostat Problems - HELP?

  • 26-06-2015 12:04pm
    #1
    CSOSulla
    Registered Users, Registered Users 2 Posts: 30 ✭


    Hi All,

    I am not a plumber, but am looking for help on finding an alternative or replacement for the current thermostat. The installers have proved pretty useless. So am looking for advice.

    The installed thermostat is [UV] HP 150. It seems a common enough thermostat, but simply is unfit for the job, its over-complicated and is impossible to use in any way as a normal thermostat. It effectively simply acts as on on/off switch.

    HP 150 - PDF
    http://www.philex.com/assets/downloads/products/65110R_IM_v1_6payol.pdf

    We were told this was the ONLY thermostat that could be used, but we have since found many users have replaced them. Unfortunately we don't know of anyone ourselves who has changed the thermostat.

    Does anyone know of a decent cheap alternative that actually works? It will be connecting to a Benekov 15 pellet burner/boiler. But essentially any thermostat of the correct amperage/voltage should work?

    Any help would be much appreciated as we have been stuck with this problem for some time and it is getting worse.

    Regards - S


Comments

  • #2
    CSOSulla
    Registered Users, Registered Users 2 Posts: 30 ✭CSOSulla


    Wow,

    117 views and not one reply! Amazing .......

    Thanks all....

    S


  • #3
    ptogher14
    Registered Users, Registered Users 2 Posts: 203 ✭✭ptogher14


    Looking at the link it seems the stat is a battery stat requiring a feed and switch wire. There are plenty of alternatives. A standard cheap stat will work but will not be programmable. What are you looking to do?


  • #4
    CSOSulla
    Registered Users, Registered Users 2 Posts: 30 ✭CSOSulla


    Hi P,

    Really what we are looking for is a simple thermostat that works.

    The system was installed by PES

    (Sustainable Energy author Ireland (SEAI))
    Another Unhappy Sustainable Energy Customer
    http://wood-pellet-ireland.blogspot.ie/2013/05/prime-energy-solutions-and-benekov.html

    They told us that only this thermostat would work on the boiler. However, it has never worked and PES had major problems getting it to even link to the boiler, added to which the stat has never worked as advertised. The stat that's fitted is over-complicated, not well built and seems altogether useless.

    We need a replacement which does what it says on the box. We are in the Midlands and any recommendations on a reliable DECENT person/company who could fit a thermostat would be greatly welcome.

    Regards - S


Advertisement