Acoustic Solutions ICS-160 car stereo

Heya,

Any ideas where I can get manual for this, cant find it on Google !!

I replaced my car stereo (lost faceplate) with this one but none of the settings are saved when car is turned off ! Exact same connections going into the back of this one as the previous stereo (where settings were saved), any ideas what this could be?

Also, it takes a memory card.. any ideas how to format this and copy music onto it for easier navigation through the artists?

Thanks for any help

TherapyBoy

The radio not saving your settings means it's wired incorrectly. This can normally be fixed by swapping the 2 positives around on the wiring harness, or at worst running an ignition switched live wire from the fuse box in the car. It depends on what sort of car you have & what way the radio needs to be connected.
For getting a manual & instructions on formatting the memory card I'd contact whoever you purchased the radio from.

Thanks, its an ISO connection (I think that's what its called) same way the previous one was wired...

Exactly like this

TherapyBoy

It's still wired incorrectly, you'll need to swap the 2 positives in the ISO harness around or run a new one from the fuse box if there is no 12v ignition feed at the radio.

Took along time and effort but eventually swapped the 2 positives and working great now

Thanks