Stuart turner pump not working

foleypio

Hello guys,

I have an 2 bed apartment rented out & I've just been informed that the showers are not working((ensuite & main bathroom) while the taps are working fine albeit the pressure is a little low in the bathrooms.

I'm aware Stuart turner pumps were used when the apartment was built a few years ago. I'm thinking that I'll need a new circuit board for the pump but I've been quoted a figure of 160 euro for labour, cost of board, etc. Is this reasonable? Does anyone have any experience of the above? Any help is appreciated. Thanks

The_Conductor

Foleypio- we have a plumbing and heating forum here on Boards- I've moved your thread from the Accommodation and Property forum to the Plumbing forum. Please note- the forum charter for Plumbing and Heating now applies.

Kind regards,

The_Conductor

foleypio

The_Conductor wrote: »

Foleypio- we have a plumbing and heating forum here on Boards- I've moved your thread from the Accommodation and Property forum to the Plumbing forum. Please note- the forum charter for Plumbing and Heating now applies.

Kind regards,

The_Conductor

Unfortunately no one has been active in that forum for years:)

The_Conductor

Me bad. I'm sorry.
I'll get one of the Admins to move it for you again.
Seeing as we appear to be on a solo flight here- have you a preferred destination? (I always wanted to be able to say that!)

The_Conductor

Foleypio- I'm having trouble trying to contact mods/cmods- unfortunately. Please bear with me.

sbsquarepants

Modern plant on the naas road sell them. I replaced mine about 2 years ago. €50 quid and about 45 mins or so to switch over. Would literally be a 5 min job if your pump is a bit more accessible than mine was.

The Hill Billy

foleypio wrote: »

Unfortunately no one has been active in that forum for years:)

CMod here... The oldest non-stickied post on the first page of this forum is from 2 days ago. This is a very active forum & also the correct forum for your query.

tHB

antoinolachtnai

If you are in Dublin, I have someone who will fix this if it is just the circuit board, but will replace your pump with a refurb if the problem is more complex. I can't remember price he charges for a board, but it will be a good bit less than 160. PM me if needed.

K.Flyer

sbsquarepants wrote: »

Modern plant on the naas road sell them. I replaced mine about 2 years ago. €50 quid and about 45 mins or so to switch over. Would literally be a 5 min job if your pump is a bit more accessible than mine was.

As of Jan 1st 2015, Modern Plant only sell the printed circuit board for Stuart Turner pumps as part of a complete service kit and not as a separate component.
Individual Non- Genuine parts are available, but not through Modern Plant.

To the O.P.
Stuart Turner pumps are very repairable making it possible to replace almost all of the main components on site.

corkgsxr

They stopped supplying parts to anywhere in cork.

Boards are 80 euro.