If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

UPC Splitter Question

ucd.1985 · 2015-04-28 13:11:47

Hi Everyone, I have a broadband only package with UPC. Based on my research I understand that if I install a coax splitter into the UPC point that delivers my broadband, I should be able to conntect a coax cable from the splitter to the back of the TV and should be able to tune in basic channels. Is the above correct? What…

28-04-2015 02:11PM

#1
ucd.1985

Registered Users, Registered Users 2 Posts: 867 ✭✭✭

Join Date: March 2009

Posts: 802
Hi Everyone,

I have a broadband only package with UPC.

Based on my research I understand that if I install a coax splitter into the UPC point that delivers my broadband, I should be able to conntect a coax cable from the splitter to the back of the TV and should be able to tune in basic channels.

Is the above correct?

What channels might I be able to receive.

Thanks in advance.

Tagged:

upc

splitter

0

Comments

#2 28-04-2015 10:21PM

The Cush

Registered Users, Registered Users 2 Posts: 16,041 ✭✭✭✭

Join Date: October 2002

Posts: 15808

Analogue channels - http://www.boards.ie/vbulletin/showpost.php?p=88414136&postcount=15

Splitter like this - http://www.amazon.co.uk/Cable-Splitter-Modem-Virgin-Dbox/dp/B0014N5YJY/ref=sr_1_4?ie=UTF8&qid=1379035679&sr=8-4&keywords=tv+cable+splitter

0
#3 15-09-2015 08:55PM

oconnn1

Registered Users, Registered Users 2 Posts: 3 ✭

Join Date: April 2005

Posts: 2

Hi,

I have just moved into a rented house with a UPC access point.

There is currently a 3 way splitter attached and there is a white coax cable running from point 1 to a TV, there is nothing plugged into point 2 and there is another coax cable in point 3 which is further split along the line to another 2 TV's.

The new broadband router arrived today and i figured i could just plug the coax cable into the middle slot of the 3 way splitter which was free. It worked perfectly but eventually kept knocking off the signal on one of the TV's.

Am i asking too much to be able power Fibre broadband while also giving analogue channels to 2 other TV's?

Thanks

0