WA M16 GBBR With extras(images added)

Jsmurff

I would like to trade my WA M16 GBBR which was purchased from Horse84 who originally purchase from Meridan64.

It started life as an M4A1 but had a G&P M5 RAS front kit attached which includes a 20" steel barrel which adds a good bit of heft to it. It also has the G&P full length M16 stock which is filled with some typ of plasticine or potters clay. It doesn't really add all that much weight to it and should easilly removed i just don't have the time to do so.

Internally it has what I believe is an Inokatsu Super bolt although there is no marks to identify it as such the bolt is steel and the nozzles appears to be the same colour and made of aluminium.

The Fire Control Group (FCG) basically the components in the lower half, appear to be the original WA ones and are in decent condition.

The inner barrel and hop unit appear to be the standard ones that come with the M5 kit so it is likely not to be a tight bore but infact 6.04G&P barrel.

I have tried PM'ing meridan64 to ask him what the specs were as his original advert was a little vague but he has yet to reply.

Now for the dings and dents. The face of the hammer does appear to be quite chewed up however it does not show any signs of cracks or fractures so is still perfectly fine. The nozzle is missing a chunk from the rear but still cycles perfectly fine. But I would suggest replacing this part asap.

Other then the hammer and nozzle there is no other issues.

Now for the extras:
1x WA Greengas mag
3x V2 Pro Win Gas mags: 1 of these is gass tight the other two are leaking however this is a simple fix for anyone willing to try I just do not have time to open all of these to see what's wrong.
1x GHK V1 Co2 mag. Have no idea if this works as I have no Co2 to test it with
Element Delta Ring wrench/ armourers tool
G&G valve key

This is pretty much a project peice and not quite fully skirmishable but shouldnt take much to get it up to snuff it does cycle in its current state and fires between 300-320fps depending on gas and weather.

In terms of trade I am after an AK74 AEG prefferebly not the short barreled 100 series and with a few mags batteries and charger. Or maybe something else might take my fancy

Can meet in cork city Monday to Friday or swap via post as long as you have someone who can vouche for you. No U18's

Lemming

Whilst I can appreciate that you've asked for trades, have you any sort of sale price in mind if you were to part for cash?

Also, are the prowins STANAG or VN-era box mags?

Jsmurff

They are the 40rnd stanag and to be honest I don't have a price in mind at the moment but will think on it and get back to you before the end of the week

Jsmurff

Bump

Looking for a VFC or E&L AK 74 on its own.

Or

Either CYMA CN040, DBoys RK-02 with some mags battery and charger.

May be open to other models the worst I can say is no

Jsmurff

Bump

Has been cleaned and lubricated

Open to offers of trade

AlanLangford

Would you be interested in a real wood m14 with 1 regular mid cap, 4 short style mid cap mags, hi-cap, battery, charger, G&P scope mouth and scope?

Jsmurff

AlanLangford wrote: »

Would you be interested in a real wood m14 with 1 regular mid cap, 4 short style mid cap mags, hi-cap, battery, charger, G&P scope mouth and scope?

I am not a fan of the classic look would prefer a scout barrelled EBR or a kart MCR .308 thanks for the offer though

AlanLangford

Jsmurff wrote: »

I am not a fan of the classic look would prefer a scout barrelled EBR or a kart MCR .308 thanks for the offer though

Very well, offer still stands

Jsmurff

I'll keep it in mind Allan cheers

Will now sell for €220 if you can meet or I can post but meet is preferred. I am willing to go 50/50 on the shipping due to the sheer weight of it. I can take PayPal or postal order.

Can mods please edit op an thread title to include the same.

ElSniperino

Do you know if the magazines will fit an AGM M4? Because I could offer on buying the magazines separately if you're willing.

Jsmurff

ElSniperino wrote: »

Do you know if the magazines will fit an AGM M4? Because I could offer on buying the magazines separately if you're willing.

AFAIK they will but may require a different hight route bucking or mag catch pro win sells them in sets of 5 with a 120% hammer spring specifically for this perpouse

As of now I am hoping to sell/ trade as whole but will put you first in line if I decide to spli

Jsmurff

Bump

Price drop to €210

Still open to offers of trade anything but an m4, spring sniper or shotty

Jsmurff

Bump

Jsmurff

Bump

Any G&P M4's out there

Jsmurff

Bump interested in M4 aegs of the G&P or King arms persuasion

Also willing to sell as follows:

Rifle with original gas mag and delta ring tool €140

GHK Co2 mag €20

3 ProWin's for €60 or €25 each

Prices DO NOT include postage or PayPal fees.

ElSniperino

I'm willing to buy the CO2 mag and the 3 (what I'm assuming you mean Prowin =P) mags from you for asking.

Jsmurff

Bloody autocorrect

Offer accepted to pms's

Jsmurff

Bump mags gone

M16 is left @ €140 + P&P or will trade for M4 aeg

Jsmurff

Bump

€140 is an absolute steel for a gbbr let alone a WA With an Inokatsu steel bolt and a G&P M5 Front assembly with 20" steel barrel

Norinco

trade with Gen 2 KWA CQB, 315 FPS., 1year old, used only around 6times.Fitted with NEW WE hand guard,delta ring set & grip to match the greyish black NEW G&P Stubby Stock.Also fitted with ACM VLTOR folding front sight.Will also come with Orig. KWA front sight,stock tube & stock.Wired to Deans & Free 7.4v 2,200 mah lipo.All you need to pay both shipping since this is worth than €140 , it's more than fair enough mate

Norinco

http://wthax.org/image/133248/

Norinco

http://wthax.org/image/133249/

Jsmurff

It's sounds good but I am wondering if it's front or rear wired? Also where are you based? I couldn't pay both postage I can do 50/50 at the most

Norinco

Could you please post pictures (front,back & sides) of bolt? As i couldn't find nozzle replacement.Only Whole bolt set in redwolf.Thank U.Based in Bray.rear wired

Jsmurff

Quite a few companies make nozzles for the magma system G&P, RA Tech, Inokatsu, Vipertech etc

Here's the newest available model from FG Airsoft: http://www.milspecsolutions.co.uk/specialist-suppliers/fg-airsoft-116/fg-airsoft-wa-m4-adjustable-nozzle.html

I will have the pic up later around lunch time

Jsmurff

Photos of the bolt as requested

Jsmurff

Bump

Norinco

Trade Withdrawn.Good luck with sales

Jsmurff

Norinco wrote: »

Trade Withdrawn.Good luck with sales

No problem and cheers

Jsmurff

Bump still interested in trades or €140

AlanLangford

Interested in a wood kit m14, G&P scope mount, scope mid cap, hi-cap, charger and battery? Only skirmished once

Jsmurff

Thanks Allen but afraid I can't take trades on this anymore as I need cash so it's now available for €130

AlanLangford

Jsmurff wrote: »

Thanks Allen but afraid I can't take trades on this anymore as I need cash so it's now available for €130

If you have a gas mag laying around would it be possible to see it fire?

Jsmurff

AlanLangford wrote: »

If you have a gas mag laying around would it be possible to see it fire?

It still comes with the original gas mag I will try and get a video up

Jsmurff

Bump €125 + p&p

Jsmurff

Bump

Jsmurff

Bump €120 my lowest price not going any lower.

Jsmurff

Bump

Jsmurff

Bump

Jsmurff

Bump €120 postage and all

Jsmurff

Withdrawn from sale

shytan

Withdrawn & closed at OPs request