Anyone using F1000 on ADSL?

Dermot McDonnell

Can you post a pic of your ADSL settings, please, from your F1000.

TIA.

kaizersoze

I was using one on ADSL for a while. It worked perfectly.
I'm not using it any more so can't post a pic but here are the standard Eircom ADSL D1000 modem....

yuloni

This post has been deleted.

Dermot McDonnell

kaizersoze wrote: »

I was using one on ADSL for a while. It worked perfectly.
I'm not using it any more so can't post a pic but here are the standard Eircom ADSL D1000 modem....

Thank you for this. I would still like to see the F1000 ADSL settings if anyone can assist.

TIA

ED E

yuloni wrote: »

I'd be interested myself to hear has anyone used it on a standard ADSL connection (i.e. ADSL1... upto 8 Mbps)

Will work just the same.

Dermot McDonnell

Here's what I think what the settings can be. My entries are in bold but I do not have ADSL to test it. Sone with an F1000 working with ADSL might be so kind as to confirm.

TIA

F1000 Broadband ADSL:

General

Active Yes

Name : ADSL

Type : ADSL over ATM

Mode : Routing

Encapsulation: PPPoE

IPv6/IPv4 Mode: IPv6/IPv4 DualStack

ATM PVC Configuration

VPI [0-255]: 8

VCI[32-65535]: 35

DSL Link Type: EoA

Encapsulation Mode: LLC/SNAP-Bridging

Service Category: UBR Without PCR

PPP Information

PPP User Name : eircom@eircom.net

PPP Password : broadband1

PPP Trigger Type : Auto Connect

Authentication Method: AUTO

IDLE Timeout [minutes]: 5

PPPoE Service Name :

PPPoE Passthrough :

IP Address

Obtain an IP Address Automatically YES

Static IP Address

IP Address :

Subnet Mask :

Gateway IP Address :

Routing Feature

NAT Enable : YES

Fullcone NAT Enable :

IGMP Proxy Enable : YES

Apply as Default Gateway : YES

DNS server

DNS : Static

DNS Server 1 : 8.8.8.8

DNS Server 2 : 4.4.4.4

IPv6 Address

IPv6 Address: Automatic

Prefix Delegation(IA_PD): YES

IPv6 Routing Feature

MLD Proxy Enable :

Apply as Default Gateway

IPv6 DNS Server :

IPv6 DNS : Dynamic

IPv6 DNS Server 1 :

IPv6 DNS Server 2 :

VLAN

Active :

802.1p :

802.1q :
(0~4094)

QoS

Rate Limit :
(kbps)

WAN Outgoing Default Tag :
Enable Disable

DSCP :
(0~63)

MTU

MTU Size : 1492 MTU [68-1500]

Bridge and Routing mode in the same WAN

Enable Con-current WAN

yuloni

This post has been deleted.

Dermot McDonnell

yuloni wrote: »

This post has been deleted.

Excellent news. You may get better ping times if your change the hard coded DNS from Google (8.8.8.8, 4.4.4.4) to Eircom's DNS - I do not have the IPs here. Folk say that helps, as does 802.11 N Only wifi for getting better throughput to wifi devices.

For DSL Stats, you need the v6b1 firmware, but I guess you know that already. It's on kitz. Look forward to hearing you thoughts. Good work

yuloni

This post has been deleted.