Where can I get this kitchen cupboard hinge?

CuppaCocoa

It's the part that attaches to the cupboard carcass that the hinge clips on to. Part of the metal snapped on it and I need to replace it. I did get replacement hinges but they're not the same backplate and I don't want to go drilling extra holes in the cupboard. The kitchen was fitted by a company in the North. I'm in Dublin.

my3cents

If you want to google for what you need here's a good starting point http://www.amazon.co.uk/Plated-Sprung-Cabinet-Cupboard-Sliding/dp/B00CDKSP3Y/

You'll probably have to replace both hinges on the one door as its unlikely you'll get identical ones but you should get a pair that will fit easily enough.

CuppaCocoa

Looking for something?
We're sorry. The Web address you entered is not a functioning page on our site. :mad:

my3cents

Try again http://www.amazon.co.uk/Plated-Sprung-Cabinet-Cupboard-Sliding/dp/B00CDKSP3Y/

You also need to check if the other half of the hinge the part on the door is in a cut out round hole or just screwed to the surface.

CuppaCocoa

my3cents wrote: »

Try again http://www.amazon.co.uk/Plated-Sprung-Cabinet-Cupboard-Sliding/dp/B00CDKSP3Y/

You also need to check if the other half of the hinge the part on the door is in a cut out round hole or just screwed to the surface.

Yes, it's a cut out round hole. It's hard to see from the picture whether it's the same backplate though.

my3cents

lilybarlean wrote: »

Yes, it's a cut out round hole. It's hard to see from the picture whether it's the same backplate though.

You won't get the same back plate. Just replace the hole unit, both top and bottom. Then you adjust them on a screw for the exact fit on the part you posted a picture of.

my3cents

Some info on adjustment