Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.

https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Oasys GSA

richyrich100 · 2015-01-07 14:29:25

Hi Guys, I'm trying to do something in Oasys GSA 8.6 which should be easy but I cant figure out how to do. I want to create a channel beam which tapers longitudinally. One end of the beam should be 300mm depth, 50mm flanges and 4 mm thick with the other end being 130mm depth 50mm flange and 4mm thick. If anyone could be of…

07-01-2015 03:29PM

#1
richyrich100

Registered Users, Registered Users 2 Posts: 4 ✭

Join Date: January 2015

Posts: 2
Hi Guys,

I'm trying to do something in Oasys GSA 8.6 which should be easy but I cant figure out how to do.

I want to create a channel beam which tapers longitudinally.

One end of the beam should be 300mm depth, 50mm flanges and 4 mm thick with the other end being 130mm depth 50mm flange and 4mm thick.

If anyone could be of assistance that would be great.

Rich

Tagged:

oasys gsa

0

Comments

#2 07-01-2015 10:46PM

breadmonkey

Registered Users, Registered Users 2 Posts: 3,608 ✭✭✭

Join Date: February 2005

Posts: 3049

As far as I know GSA doesn't support tapered sections. Give their support a shout (they will get back to you).

0
#3 08-01-2015 09:11AM

richyrich100

Registered Users, Registered Users 2 Posts: 4 ✭

Join Date: January 2015

Posts: 2

That's what i thought.

Unfortunately my company hasn't renewed their maintenance in over a year! I contacted support and they just came back with a quote which my company wont go for, guess ill have to leave it then.

0