WHICH PART

ciaeim

I have fulcrum quatro wheels and the freehub is worn i think (their is play in the cassette and a rough noise ) my set up is 11 speed ultegra 54/39 and 11-28 cassette, anyone tell me what freehub to get and what tools i would require to do the job myself and any other advice would be great, thanks Ciaran

Cee-Jay-Cee

Tools needed are 5mm Allen key and a 17mm (or maybe it's 14mm can't renember but it's one of the two) spanner. Put the 5mm Allen key into the hole on the non drive side and remove the nut on the drive side. The freehub pulls off ( turn it anti clock wise while pulling to close the pawls to slide it off)

The Quattro's have the same freehub as Zondas Shamals, Eurus and Fulcrum 3's and Zero's with 17m axle.

ciaeim

Cee-Jay-Cee wrote: »

Tools needed are 5mm Allen key and a 17mm (or maybe it's 14mm can't renember but it's one of the two) spanner. Put the 5mm Allen key into the hole on the non drive side and remove the nut on the drive side. The freehub pulls off ( turn it anti clock wise while pulling to close the pawls to slide it off)

do i have to take off the cassette to get at the freehub?

Cee-Jay-Cee

ciaeim wrote: »

do i have to take off the cassette to get at the freehub?

Yes remove cassette first

ciaeim

Cee-Jay-Cee wrote: »

Yes remove cassette first

thank you , but do i need other tools to remove cassette?

Eamonnator

This is the free hub, that you need

http://www.wiggle.co.uk/fulcrum-shimano-sram-freehub-body/

You will need these tools or similar to remove cassette:

http://www.chainreactioncycles.com/ie/en/park-tool-chain-whip-shop-sprocket-remover-sr2-2/rp-prod8211

and

http://www.chainreactioncycles.com/ie/en/cyclo-pro-series-cassette-lockring-remover/rp-prod7975

The links are for illustration, you may be able to get them cheaper, elsewhere.
You will also need a vise grip for the lockring remover

ciaeim

Eamonnator wrote: »

This is the free hub, that you need

http://www.wiggle.co.uk/fulcrum-shimano-sram-freehub-body/

You will need these tools or similar to remove cassette:

http://www.chainreactioncycles.com/ie/en/park-tool-chain-whip-shop-sprocket-remover-sr2-2/rp-prod8211

and

http://www.chainreactioncycles.com/ie/en/cyclo-pro-series-cassette-lockring-remover/rp-prod7975

The links are for illustration, you may be able to get them cheaper, elsewhere.
You will also need a vise grip for the lockring remover

thanks for that its a great help, just one more query the hub in the link seems to be for just about every fulcrum wheel but no mention of fulcrum quatro are they all the same?

Eamonnator

If you read down through this offering on Ebay, you will see, that the free hub fits the Racing Quattro, as well. But beware, that particular free hub is for Campagnolo cassettes, it won't work with Shimano.


http://www.ebay.co.uk/itm/Campagnolo-fulcrum-freehub-body-shimano-or-campagnolo-FH-BUU015-for-alloy-axle-/161375260981?pt=UK_sportsleisure_cycling_bikeparts_SR&var=&hash=item2592b71135

ciaeim

Eamonnator wrote: »

This is the free hub, that you need

http://www.wiggle.co.uk/fulcrum-shimano-sram-freehub-body/

You will need these tools or similar to remove cassette:

http://www.chainreactioncycles.com/ie/en/park-tool-chain-whip-shop-sprocket-remover-sr2-2/rp-prod8211

and

http://www.chainreactioncycles.com/ie/en/cyclo-pro-series-cassette-lockring-remover/rp-prod7975

The links are for illustration, you may be able to get them cheaper, elsewhere.
You will also need a vise grip for the lockring remover

thanks eamonator i am just about to purchase the freehub that you quoted, I am just hoping that you or someone else more knowledgeable than me (not too hard )could confirm that this is the right part . thanks guys

jimm

You say that you're running Ultegra, so you need a Shimano compatible freehub.

ciaeim

jimm wrote: »

You say that you're running Ultegra, so you need a Shimano compatible freehub.

Is that the one that is quoted in the link by eamonator thanks

jimm

Eamonnator says it's for Campagnolo cassettes only. I'm replying from phone so can't see the link sorry.

jimm

Eamonnator says it's for Campagnolo cassettes only. I'm replying from phone so can't see the link sorry.

ciaeim

Eamonnator wrote: »

This is the free hub, that you need

http://www.wiggle.co.uk/fulcrum-shimano-sram-freehub-body/

You will need these tools or similar to remove cassette:

http://www.chainreactioncycles.com/ie/en/park-tool-chain-whip-shop-sprocket-remover-sr2-2/rp-prod8211

and

http://www.chainreactioncycles.com/ie/en/cyclo-pro-series-cassette-lockring-remover/rp-prod7975

The links are for illustration, you may be able to get them cheaper, elsewhere.
You will also need a vise grip for the lockring remover

the link in this is for shimano i think,maybe when u can u will look at it and confirm if its the right one i would appreciate it thanks

Eamonnator

This is the one you want:

http://www.wiggle.co.uk/fulcrum-shimano-sram-freehub-body/

Eamonnator

I've just noticed, that Cyclesuperstore have them as well:

https://www.cyclesuperstore.ie/shop/pc/viewPrd.asp?idproduct=74036

ciaeim

Eamonnator wrote: »

I've just noticed, that Cyclesuperstore have them as well:

https://www.cyclesuperstore.ie/shop/pc/viewPrd.asp?idproduct=74036

thanks eamonator prob stick with wiggle as have one or two other items to get, cheers bud

Cee-Jay-Cee

To be sure, remove your own freehub and measure the axle to be sure it's 17mm in diameter. If it is the ones linked to above are the correct ones for your wheels.

Eamonnator

Cee-Jay-Cee wrote: »

To be sure, remove your own freehub and measure the axle to be sure it's 17mm in diameter. If it is the ones linked to above are the correct ones for your wheels.

No need to worry, read the description in this link:



https://www.cyclesuperstore.ie/shop/pc/viewPrd.asp?idproduct=74036

ciaeim

Eamonnator wrote: »

No need to worry, read the description in this link:



https://www.cyclesuperstore.ie/shop/pc/viewPrd.asp?idproduct=74036

yea i did thanks guys,also pushed button on few other bits and pieces:):D

Cee-Jay-Cee

Eamonnator wrote: »

No need to worry, read the description in this link:



https://www.cyclesuperstore.ie/shop/pc/viewPrd.asp?idproduct=74036

That's misleading as the Fulcrum 5's and 7's have 12mm axles and ao the freehub in that link will not fit them.