08 CR Passat 2.0 EML

Truckermal

Hi folks a EML came on about 2 weeks ago so I cleared it using Torque app but appeared again so I done a VCDS scan.

day,26,October,2014,14:34:06:32264
VCDS Version: Release 11.11.3
Data version: 20120401

---

---

Address 01: Engine Labels: 03L-906-022-CBA.clb
Control Module Part Number: 03L 906 022 FN HW: 03L 907 309
Component and/or Version: R4 2,0L EDC G000SG 2643
Software Coding: 0000072
Work Shop Code: WSC 84224 288 40362
VCID: 76E9F80101DC1C9
2 Faults Found:

008213 - Intake Manifold Flap Position Sensor (Bank 1)
P2015 - 000 - Implausible Signal - MIL ON
Freeze Frame:
Fault Status: 11100000
Fault Priority: 2
Fault Frequency: 2
Mileage: 176978 km
Time Indication: 0
Date: 2000.00.00
Time: 22:09:08

Freeze Frame:
RPM: 2392 /min
Speed: 103.0 km/h
Load: 43.5 %
Lambda: 11.8 %
Lambda: 2.4 %
Voltage: 0.380 V
Bin. Bits: 00000000

The other fault is a glow plug on cylinder 4..

George Dalton

That's an expensive one Mal. You need a replacement intake manifold. You should do it sooner rather than later as well because the DPF won't regen properly with that error code present.

Truckermal

George Dalton wrote: »

That's an expensive one Mal. You need a replacement intake manifold. You should do it sooner rather than later as well because the DPF won't regen properly with that error code present.

How expensive is expensive George? ?

George Dalton

€400 plus VAT plus fitting.

Truckermal

George Dalton wrote: »

€400 plus VAT plus fitting.

I might ring you so Monday, car will be gone soon too so it's a PITA..

Nino Brown

http://www.youtube.com/watch?v=hL4VwMKO0Pg

Have a look at this video including the comments Mal.

Truckermal

Nino Brown wrote: »

http://www.youtube.com/watch?v=hL4VwMKO0Pg

Have a look at this video including the comments Mal.

Cheers! ! I cleared the fault again yesterday and the DPF regenerated and no sign of the EML yet. I might try and attack it next weekend.

Truckermal

Watch "P2015 fix VW 2009 TDi" on YouTube
P2015 fix VW 2009 TDi: http://youtu.be/yrVFpYzMX3g


Watch "VW Jetta TDI P2015 code Fix" on YouTube
VW Jetta TDI P2015 code Fix: http://youtu.be/0HbIL5u0bng

I was watching these so had a look at mine and freed it with a screwdriver so it only seems to stick. I have started the car several times now and no sign of the EML again so maybe it's worth dismantling and cleaning.

Truckermal

Update light still off and flap motor working perfectly I will put a e clip on it when I get time.

FR85

Get the swirl flaps blanked altogether and be done with it!!

Truckermal

FR85 wrote: »

Get the swirl flaps blanked altogether and be done with it!!

The next man can be doing that. ...