Wanted Shimano 600 167.5mm Crankset and 90mm Quill Stem with Handlebars 38-40cm

Seweryn

Hi Guys,

I am looking for Shimano 600 167.5mm Crankset or something very same to finish a project from middle '90s.
Also, need a 90mm quill stem preferably with shallow and narrow handlebars 38 to 40cm width.

Thanks.

Seweryn

Anyone ?

Z_a_x

Hi,I'll have to check the details but from memory I have a Cinelli Giro d'Italia 38cm bars (with double cable grooves) and a suitable Cinelli Xa 100mm quill stem (26.0mm clamp). I also have Cinelli Campione del Mondo 38cm bars (no grooves) and a suitable Cinelli Xa 80mm quill stem (26.4mm clamp).
Let me know if you are interested and I'll dig them out, take a few pictures and come up with a price.
Thanks

Seweryn

Z_a_x wrote: »

Hi,I'll have to check the details but from memory I have a Cinelli Giro d'Italia 38cm bars (with double cable grooves) and a suitable Cinelli Xa 100mm quill stem (26.0mm clamp). I also have Cinelli Campione del Mondo 38cm bars (no grooves) and a suitable Cinelli Xa 80mm quill stem (26.4mm clamp).
Let me know if you are interested and I'll dig them out, take a few pictures and come up with a price.
Thanks

Thank you for your response. I may be interested in the bars, however I am trying to source the crankset first, as I am unable to do anything without one. Seems like a tough task though, I can't find it anywhere.
I will let you know if things are progressing.

Z_a_x

Okay, no rush, I have a bit of a clear out planned but it'll be a couple of months before I get around to it. Good luck with the crank search.

Idleater

Seweryn wrote: »

Thank you for your response. I may be interested in the bars, however I am trying to source the crankset first, as I am unable to do anything without one. Seems like a tough task though, I can't find it anywhere.
I will let you know if things are progressing.

I am using 600 cranks on my singlespeed commuter. I don't need them specifically, so if it would make your bike I'm sure that I could find some other track square taper crankset.

The rings are 52/42 and I haven't used them (previous owner did though)

Just found the thread where I bought them €30+postage.

Seweryn

Idleater wrote: »

I am using 600 cranks on my singlespeed commuter. I don't need them specifically, so if it would make your bike I'm sure that I could find some other track square taper crankset.

The rings are 52/42 and I haven't used them (previous owner did though)

Just found the thread where I bought them €30+postage.

Thanks, that would be great. Could you just confirm the crank arm length ?

Idleater

Seweryn wrote: »

Thanks, that would be great. Could you just confirm the crank arm length ?

170.

And for the bad news since you made me go out to the shed, they are 105 cranks, apologies. If they or the rings are still any use, let me know.

Seweryn

Idleater wrote: »

170.

And for the bad news since you made me go out to the shed, they are 105 cranks, apologies. If they or the rings are still any use, let me know.

Thanks for your help. I actually have a spare Shimano 105 crankset in 170mm size (and also a 600 Shimano in 170mm in another bike), just looking for a shorter 600 tri-colour ckrankset.
Thank you anyway.

Seweryn

Still looking for the stem and possibly the handlebars with shallow drop.

Ole Rodrigo

Seweryn wrote: »

Still looking for the stem and possibly the handlebars with shallow drop.

I was looking for the same second hand, but found new ones at a good prices on Planet X UK.

Cinelli stem and bars plus post for about 70 quid.

http://www.planetx.co.uk/brand/q/Cinelli

http://www.boards.ie/vbulletin/showthread.php?t=2056740609&page=24

Seweryn

Ole Rodrigo wrote: »

I was looking for the same second hand, but found new ones at a good prices on Planet X UK.

Cinelli stem and bars plus post for about 70 quid.

Thanks. Not bad deals out there, but they are all wrong lengths for me unfortunately.

Ole Rodrigo

Seweryn wrote: »

Thanks. Not bad deals out there, but they are all wrong lengths for me unfortunately.

Ah.There is the slightly more expensive A1 quill. Its on wiggle for 65 quid from 90mm upwards.

Seweryn

Ole Rodrigo wrote: »

Ah.There is the slightly more expensive A1 quill. Its on wiggle for 65 quid from 90mm upwards.

Thank you. That is not a bad option, but not cheap. Will need a handlebards for the specific clamp size. Actually, they have two models in 26mm.