Hakko laser Boresighter

sprocker spaniel

USED A COUPLE OF TIMES BUT IN AS NEW CONDITION

ASKING PRICE €100

Laser included adjustment complex Hakko Laser Boresighter HL-7-II is a "sibling» TASCO Laser Boresighter LBS 1 (one plant manufacturer), designed for the "cold" zeroing rifles and consists of a laser module and four barrel liners made of chrome-plated steel. Liners have different diameters to be installed in the barrels cal. .22 - .27, .27 - .35, .35 - .45 .45 - .55 ​​(From 5.6 mm to 13.97 mm).
Each insert has one hand split shank with adjusting screw, the other - a conical thickening (with thread for connecting the laser module), which allows for a tight fit in the bore of the liner and the alignment of the laser beam with the axis of the bore.
This ensures compatibility with virtually all devices caliber rifles. To check the specified alignment after installing the liner in the trunk enough to include laser and rotate the insert in the bore. If the rotation of the liner laser dot on the target describes the ring, with a special key and adjusting screws located on the laser module can eliminate the "heartbeat" of the beam, reducing the ring to the point. Difficult in that there is nothing!
As shown, almost beam mixing is not necessary to engage in - all done with sufficient accuracy at the factory.

Distance "zeroing": 15-200 m (max. distance depends on the lighting conditions).
Type of laser: red semiconductor
The laser wavelength: 635-655 nm
Power: <5mW
Spot size at a distance of 100 m approx. 26 mm
Power supply: 3 batteries type LR 44 (3 hours of continuous operation)

sprocker spaniel

Bump , open to offers

marcp

Where are you based

sprocker spaniel

Bump

sprocker spaniel

Bump

sprocker spaniel

Bump