Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

HKC 1070 External bell problem

Options
  • 20-07-2014 8:19pm
    #1
    Rafal1976
    Registered Users Posts: 5 ✭


    Hi All

    After Installation system HKC 1070 works fine but.
    After install system tested all rooms works fine internal and external siren working fine.But after open entry door and do not code alarm start working without External siren ?Outside siren flash led but not sound.After tested rooms walk test working fine external and internal bell.Does anyone have any suggestions

    Regards


Comments

  • Options
    #2
    Evolution1
    Registered Users Posts: 855 ✭✭✭Evolution1


    Set the split time to 00 in timers menu.. Your entry delay is more than enough time.
    Also if you're in an estate set the external bell time to 5 mins if the system is setup to text you. If the bad guys don't flee upon it sounding within the first few seconds then 15 minutes of it ringing won't do a thing. Same with the internal bell as the system will re arm after the 5 min timer.


  • Options
    #3
    Rafal1976
    Registered Users Posts: 5 ✭Rafal1976


    wrote:
    Hi Thank you New panel 1070 setup for extra 30 sec

    Regards


Advertisement