amiko 2 tune failed

Toplink

Hi... I am sure I an doing something ridiculous here but anyway.

i had a sky box and dish working perfectly till recently. I disconnected the sky box after buying the amiko. Anyway I ran the sat cable directly into the lnb in port in amiko box.

I also connected to the tv through hdmi and connected amiko to web using ethernet port.

I have scanned and scanned using the different lnb in connections on the back of the box but I am not getting ANY channel's coming through.

i upgraded to enigma and tried scanning and nothing...

Am I missing something here?

Apogee

Are you sure you connected the coax cable to the correct port(s)? It should be the ones on top marked 'LNB in 13/18v'?



As another check, have you since reconnected the Sky box to check that the LNB is still working OK?

Toplink

Yeah, I have the correct port alright.

I better pull out the sky box and retry the connection... cant think of any reason why anything has changed but your right to suggest I check.

Fingers crossed.

Thanks

Nowso

on spark in amiko alien 2 if go into

menu , install, satellite install select astra 28.2 and hit red to scan , turn blind scan on and run

you may have been searching the terrestrial search with you need an aerial connected via the conak