Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

setting up moter with E2.???

  • 27-05-2014 3:00pm
    #1
    jondav
    Registered Users, Registered Users 2 Posts: 24 ✭


    Using box similar to amiko alien 2, icecrypt 3700 triple tuner, tuner one set fine to 28.2 east. trying to set up second tuner to either my moter or a single sat such as thor or a two way dieq switch none of which seems easy to do with this box.


Comments

  • #2
    givecredit
    Registered Users, Registered Users 2 Posts: 1,654 ✭✭✭givecredit


    I found this guide elsewhere:

    GUIDE TO MOTORISED DISH SETUP Enigma2 TUNER FOR USALS


    If your using DiSEqC 1.2 you will have to set-up the dish positions manually. If your using USALS it should be automatic.

    Here's the USALS procedure that I used.
    First make sure the dish is correctly aligned on a satellite, eg Astra 28.2E

    Press Menu
    Set Up
    goto
    Service Searching



    Tuner Configuration



    Choose Tuner ALPS BSBE2 (DVB-S2) - Press OK



    Now for my configuration??..



    Configuration Mode: Advanced
    Satellite : Astra 2A/2B/2D/Eurobird 1 (28.2e)
    Change LNB to LNB 1
    Priority : Auto
    LOF: Universal LNB
    Voltage Mode: Polarization
    Increased voltage: yes
    Tone Mode: band
    DiSEqC Mode: 1.2
    Toneburst: None
    Committed DiSEqC: None
    Fast DiSEqC : no
    Sequence repeat : no
    Command order : committed toneburst
    Uncomitted DiSEqC command : None
    DiSEqC repeats : none

    Longitude: Set this to the correct Longitude for your area.
    To find the correct longitude settings for your area go to the following website
    multimap HERE
    In the "Find a Map" box at the top left of the page, enter your post code.
    Select your country in the drop down box below it and click on the "Find" button.
    This will display a map on the screen and below the map at the bottom right you
    will see your Latitude information, example below for Postcode district:NE39 1
    Lat:54:55:09N (54.91913)
    Lon:1:44:55W (-1.74859)
    So in this example in the Dreambox menu you'd set
    Longitude: 001.748
    West
    Latitude : 54:550
    North
    Use USALS for this Sat: Yes
    PRESS OK TO SAVE
    Once this is set up on one satellite its easy to sort the rest.
    Go back into reception settings
    Highlight satellite and choose the satellite you want
    The example here shows Hellas on 39.0E




    Now select LNB and right to LNB 1



    This will fill in the configuration with your previously set configuration
    PRESS OK TO SAVE
    then scroll back up to satellite
    scroll left or right to another satellite
    goto lnb scroll right this will automatically set that satellite up
    keep repeating this on all satellites needed


Advertisement