What type of timing belt kit needed for VW ANU

derryvella

Hi I am going to change the timing belt on my VW Sharan 2003 ANU engine.
The belt and water pump were done together last time by an indy garage.

Do I need to replace the water pump again this time?

What kit would people recommend?


Has anyone done one themselves at home?
Any watch outs or tips?

I have the cam locking tools for the VW to aide me.

I hope to tackle the job in the next couple of months and I just want to get as much info and gear as possible together before hand.

Thanks all.

Interslice

I used a continental kit of misterauto.ie to do mine. Just make sure it matches your engine code. A genuine vw kit is alot more expensive unless you can exchange your water pump, but I think they only take in genuine ones. Replace your water pump! If your getting the bits separately get all the stuff that's in the kit. It'll come with a new tensioner and certain studs/ bolts and washers.

Here's some part numbers to compare what's in the kit. Only use VW, contitech or gates. If you want, PM me your e-mail and I'll send you the workshop guide in a pdf.

(1) 06A121011T
water pump with sealing washer
2.0ltr. 1.9ltr. / 4 cylinder: AWC, 4 cylinder: ATM, diesel eng. 4 cylinder: ANU,AUY,ASZ AWC,ATM

toothed belt cover / toothed belt / 1.9ltr. / diesel eng.:

toothed belt cover
/ ANU,AUY,ASZ 1 045109107F


toothed belt cover
upper / 2 026109150A


spring clamp
/ (3) 045109145H


cover panel
/ 4 1E0971904


plug
/ 5 N 10082907


hexagon head bolt (combi)
M6X16-Z1 / 6 N 0147791




allen key head bolt
M8X20 / 7 045109147A


toothed belt cover
center / 8 N 10082907


hexagon head bolt (combi)
M6X16-Z1 / 9 038109175


toothed belt cover
lower / 10 N 10082907


hexagon head bolt (combi)
M6X16-Z1 / (11) 038109119P


toothed belt
Z=120 / ASZ 13 038109243M


tensioning roller
/ 14 N 90905502


stud
CM10AXM8X73 / 15 038109454A


hexagon nut, shouldered
M8 / 16 038109244J


relay roller
/ 17 N 10444702


stud
M8F0X55 / 19 N 01508311

derryvella

Thanks mate.