Lyngsat frequency difference

HumpyGossy

Why is my satellite box showing different frequencies to whats listed on Lyngsat?

eg

Channel 5 showing at 10951 H 22001 on screen

but

10964 H 22000

on Lyngsat?

Gerry Wicklow

Check that your LNB is configured as universal

HumpyGossy

it is as far as i can figure out

LNB Type 09750/10600
LNB Power 13V/18V

all my frequencies are different

Lindenblad

All different? Including the high band channels (above 11700 mHz)?

Not that it really matters if you're receiving everything OK.

HumpyGossy

above 11700 they seem closer but still off by 1 -5

Lindenblad

LNB local oscillator frequencies can be off a bit, within each band you would expect the channels to be off by the same amount & in the same direction.

Or it might just be a receiver quirk. As long as it tunes everything, especially the channels at the band edge, like the Channel 4 transponder, I wouldn't worry.

HumpyGossy

Thanks just seems odd

I am looking to set up another dish for someone else with saorsat on 9e as well as 28.2e have everything but ka band lnb so was checking my frequencies

any idea why ka band lnb's are 4 times more expensive than universal ones?

winston_1

HumpyGossy wrote: »

any idea why ka band lnb's are 4 times more expensive than universal ones?

Supply and demand.

I'll elaborate on that. Universal LNBs are mass produced and sold all over Europe and beyond. The Ka band LNB's used for Saorsat only cover a part of Ka band and are only wanted by a minority of people of one of the most sparsely populated countries in Europe.

watty

The setbox uses AFC. The LNB downconvertor oscillator isn't exact and even varies quite a lot with temperature. So any automatic tuned transponder will not match.