HKC report same alarm event more then once

newgrove

Hi All,
This may be a silly question but...

I have a quantum 70 alarm with gsm get dialler thing. Everything works perfect on the system but I'd like to see if one setting could be changed. When a zone is triggered, for whatever reason the alarm will alert as expected. My question is, if the SAME zone is triggered a second time before I reset the alarm the system will not alert on the same zone for a second time.

Can that be changed? So if someone is banging on a back window and the alarm is going off I would have expected to get lots of messages as the window is being hit, however I currently only get one so I may just assume it's a bird who hit the window....

I have engineer code and manager access.

Thanks...

Evolution1

Does it not say for example " alarm zone 2 back door, 3rd January 12:15" then " alarm BA confirm , 3rd January 12:15"

KoolKid

If you put the shock sensors and contacts into separate zones you would get that confirmation.

nicnac

What does BA CONFIRM mean in the log after a shock sensor was triggered?
Sequence is
ENTRY DELAY
ENTRY FAULT
ALARM Z001 FRONT DOOR
BA CONFIRM

External bell triggered?

KoolKid

Burglar Alarm confirm.

nicnac

KoolKid wrote: »

Burglar Alarm confirm.

Same zone for the third time this week. Shock sensor on the front door. I can only get it to trip if I give the door a tremendous thump.