Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Cisco Switch with two VLANS

  • 07-03-2014 12:01PM
    #1
    $ausage$
    Registered Users, Registered Users 2 Posts: 691 ✭✭✭


    Hello,

    So I need to set up a testing ERP VLAN but i need it to be able to connect to the current lan to allow for remote connections, however I do not want it to connect to the internet at all.

    My set up is a Cisco SF300-24P L3 switch and thats it!

    I can get my VLANS set up but its the bridging im not sure of.

    on port 1 i have a laptop that will need to talk to both VLANS
    VLAN 20 = 192.168.2.x
    Vlan 40 = 192.168.4.x

    now this switch will have a port say 12 that will connect to the 192.168.2.0 core switch stack as an upload.

    what i want is to be able to ping and connect as below.
    All ip's will be static

    Port 1 > port 13
    Port 1 > port 12

    Port 13 > port 1 only

    Port 13 > port 1 only.

    Any ideas?
    I am not a cisco person by any means really but can throw about an odd command to get by.

    All help greatly received I am using Packet Tracer for testing at the min.

    Thanks


Advertisement