WANTED: Carbon Fork 1" steerer

TheDocMan

Carbon Fork needed, 1" steerer carbon or aluminium.
Preferably an Aero fork- black would be good but consider anything.
On complete off chance- specifically looking for fork for a Felt B12 TT bike or any Felt TT bike should do.
What's out there or any ideas of cheapish source for one
Thanks.

countrykid

TheDocMan wrote: »

Carbon Fork needed, 1" sterrer carbon or aluminium.
Preferably an Aero fork- black would be good but consider anything.
On complete off chance- specifically looking for fork fir a Felt B12 TT bike or any Felt TT bike should do.
What's out there or any ideas of cheapish source for one
Thanks.

found these last night whilst hunting for a colnago fork..
1" are hard to find and never cheap sadly..


http://www.ebay.ie/itm/PROFILE-DESIGN-ARC-1-INCH-AHEAD-CARBON-ROAD-BIKE-FORKS-COLNAGO-PINARELLO-GIOS-/131101967464?pt=UK_sportsleisure_cycling_bikeparts_SR&hash=item1e8649

http://www.ebay.ie/itm/VINTAGE-1-INCH-THREADED-CARBON-ROAD-BIKE-FORKS-700C-CHROME-CROWN-COLNAGO-GIOS-/131101967494?pt=UK_sportsleisure_cycling_bikeparts_SR&hash=item1e86494486

Idleater

I have an old 1" look carbon fork from my old bike lying around. I'm not sure what ancillary bits and pieces are about.
I could swap for one of your cassettes? 11-23?

TheDocMan

Thanks for that Countrykid. Id seen them, pricey so I'll hang for a while.
Could you post a pic of the Look fork at some stage. Thanks

Idleater

Here you go, as photogenic as I'm prepared to make it given the temperature in the shed :-(

About 27cm of steerer tube. The headset is some fsa from the old bike circa 1999.

Eamonnator

I have an unbranded one inch black carbon fork.
It has never been used. Aluminium steerer is uncut.
I bought it last year from a bike shop in England.
The forks are bladed.
I would have to get 100 euro for it.
If you're interested, I will put up a couple of photographs tomorrow.
I didn't use it, because I thought it wouldn't suit my bike.

TheDocMan

Idleater wrote: »

Here you go, as photogenic as I'm prepared to make it given the temperature in the shed :-(

About 27cm of steerer tube. The headset is some fsa from the old bike circa 1999.

Hey thanks for the prompt photo. Is bloody cold outside tonight. Fork not bad but I'll hold for now and to see what's offered if that's ok.

TheDocMan

Eamonnator wrote: »

I have an unbranded one inch black carbon fork.
It has never been used. Aluminium steerer is uncut.
I bought it last year from a bike shop in Eng
The forks are bladed.
I would have to get 100 euro for it.
If you're interested, I will put up a couple of photographs tomorrow.
I didn't use it, because I thought it wouldn't suit my bike.

This sounds like what I've in mind - price is higher than id intended but more important is to check if'd work for me. I'd need photos as the fork crown shape could impede part of the overhang from frame behind at the back of headtube. So photos up if you can and we can take it from there.
Btw where u based?

Eamonnator

This is the best, I can do for the moment.
Its a link to the fork.
I bought the forks from this shop.

http://shop.kinetic-two.co.uk/advanced-kinetic-one-elite-race-carbon-forks---1-inch-steerer-31-p.asp

I can't move on price.
I'm sure, you can see, they're a bargain at the price.

I'm in Drogheda.

Harrybelafonte

I still have the LOOK fork feom this thread if it's any use to you:

http://touch.boards.ie/thread/2057023866/1/#post86194793

TheDocMan

Eamonnator wrote: »

This is the best, I can do for the moment.
Its a link to the fork.
I bought the forks from this shop.

http://shop.kinetic-two.co.uk/advanced-kinetic-one-elite-race-carbon-forks---1-inch-steerer-31-p.asp

I can't move on price.
I'm sure, you can see, they're a bargain at the price.

I'm in Drogheda.

Wow they're pricey alright. Nice neat fork crown so that looks ok. I'll def keep it in mind and get back to you one way or the other. Just going to hold for a bit more as I've a few queries out for replacement fork. Thank a lot, be in touch.

TheDocMan

Harrybelafonte wrote: »

I still have the LOOK fork feom this thread if it's any use to you:

http://touch.boards.ie/thread/2057023866/1/#post86194793

Fork steerer too short Harry, thanks though

r27

Idleater wrote: »

Here you go, as photogenic as I'm prepared to make it given the temperature in the shed :-(

About 27cm of steerer tube. The headset is some fsa from the old bike circa 1999.

I'd be interested if the op isn't, sent you a pm
Thanks

krissovo

Eamonnator wrote: »

I have an unbranded one inch black carbon fork.
.

Again if the doc is not interested I would like these, sent a PM.

funkyjebus

I recently got these after a good search, cheapest I could find.

http://www.ribblecycles.co.uk/sp/road-track-bike/forks-forks-road-csn-carbon-alu-road-forks/csnaforr190

Eamonnator

@TheDocMan. If you want these, will you let me know, please.

@krissovo, if the Doc doesn't want the forks, and you're still interested, I'd be happy to sell to you.

TheDocMan

Work away lads if these forks suit ye. id love to keep as many options as possible open but I couldn't justify keeping the guys who were good enough to bother replying, hanging on when they've a possible sale. Hope I don't regret it.
L' etape , thanks I'll see if I can get them to do a deal
And funky, thats a good spot. Could be useful if for some reason there was a fit issue with fork crown/ headtube interface - could return them. Thanks.

TheDocMan

Work away lads if these forks suit ye. id love to keep as many options as possible open but I couldn't justify keeping the guys who were good enough to bother replying, hanging on when they've a possible sale. Hope I don't regret it.
L' etape , thanks I'll see if I can get them to do a deal
And funky, thats a good spot. Could be useful if for some reason there was a fit issue with fork crown/ headtube interface - could return them. Thanks.

Eamonnator

My forks sold to krissovo.
Absolute pleasure dealing with you krissovo .