kp 06

shnburn

co2 kp-06 for parts or repair safety doesint work no hop up in it it shoots but slide catchs odd time was told it shoots 319 fps 70 euro or would trade for working co2 pistol or glock

dave fps

Hi, whats wrong with it exactly?

shnburn

dave fps wrote: »

Hi, whats wrong with it exactly?

2 small parts fell out when the safety catch came out i have both parts the hop up is missing from it and when its shooting the slide catchs and has to be pushed back abit

dave fps

shnburn wrote: »

2 small parts fell out when the safety catch came out i have both parts the hop up is missing from it and when its shooting the slide catchs and has to be pushed back abit

Ok well thats not soo bad, the 2 pins are ment to vome out when you take out the safety, you just put in the smaller thinner onefirst, then the spring and then the larger and hold it back while pushing the safety in place (as seen in photos), thats normal to happen! and can I see a picture of the underside of the slide, where tthe hop up should be, and have you cleaned and lubed it?

shnburn

dave fps wrote: »

Ok well thats not soo bad, the 2 pins are ment to vome out when you take out the safety, you just put in the smaller thinner onefirst, then the spring and then the larger and hold it back while pushing the safety in place (as seen in photos), thats normal to happen! and can I see a picture of the underside of the slide, where tthe hop up should be, and have you cleaned and lubed it?

only got it and i didnt take the safety off it fell off as soon as i took slide off no spring came out only 2 small bitsand i got it wrong just gave it a good clean didnt see hop up cos of the amount of oil on it but slide keeps getting jammed all the time and that pic doesint work

dave fps

shnburn wrote: »

only got it and i didnt take the safety off it fell off as soon as i took slide off and there is no hop up in it

Well yes you see on the kjw kp06 when you take off the slide if you push the safety up all the way it will vome off, so what you have yo do is.... 1.take off the slide
2.put the pins into the channel as I showed in the pictures, put the safety on the gun on both sides, in a high position.
3.push back the pins with a screwdriver
4.push safety into down position...and it has to work.

here is a video, if it is not clear enaugh, I will take a video myself...this is vompletly normal to happen on a kp06

http://m.youtube.com/watch?v=EssxOXsViFs

dave fps

Also the spring might have flown somewhere...as it happened to me as well, lost the spring twice!

shnburn

dave fps wrote: »

Well yes you see on the kjw kp06 when you take off the slide if you push the safety up all the way it will vome off, so what you have yo do is.... 1.take off the slide
2.put the pins into the channel as I showed in the pictures, put the safety on the gun on both sides, in a high position.
3.push back the pins with a screwdriver
4.push safety into down position...and it has to work.

here is a video, if it is not clear enaugh, I will take a video myself...this is vompletly normal to happen on a kp06

http://m.youtube.com/watch?v=EssxOXsViFs

just want to cut my losses and get rid of it at this point

dave fps

shnburn wrote: »

just want to cut my losses and get rid of it at this point

I was just trying to help you, as it is not broken, and you could get over 100 euro on it!

shnburn

dave fps wrote: »

I was just trying to help you, as it is not broken, and you could get over 100 euro on it!

i dont want to mess around with it to much iv to go sg tuesday il tak it to them theres other things with it that the person i got it from lied about so just want to sell it on to someone who will want to get it back 100%

dave fps

shnburn wrote: »

i dont want to mess around with it to much iv to go sg tuesday il tak it to them theres other things with it that the person i got it from lied about so just want to sell it on to someone who will want to get it back 100%

Well what else is wrong with it.....if uou bring it to sg airsoft with all the parts I'm sure they will sort it out...they're really helpfull!

shnburn

dave fps wrote: »

Well what else is wrong with it.....if uou bring it to sg airsoft with all the parts I'm sure they will sort it out...they're really helpfull!

both mags i got with it are leaking one mag i cant get open at all and outer barrel has a dent in it witch i dnt think affects it just not happy with it when it was meant to be 100% dont have the money to put into getting the issues sorted out since im getting my rifle upgraded

dave fps

shnburn wrote: »

both mags i got with it are leaking one mag i cant get open at all and outer barrel has a dent in it witch i dnt think affects it just not happy with it when it was meant to be 100% dont have the money to put into getting the issues sorted out since im getting my rifle upgraded

Yes I have the same problem with my mags...I can't use a coin or allen key...I have to use a giant screwdriver to get it open, and if you try tightening it with a coin, it wont be tight enaugh and leaks at the bottom, so you use the screwdriver to tighten it and it works like new

shnburn

dave fps wrote: »

Yes I have the same problem with my mags...I can't use a coin or allen key...I have to use a giant screwdriver to get it open, and if you try tightening it with a coin, it wont be tight enaugh and leaks at the bottom, so you use the screwdriver to tighten it and it works like new

its the valves on both mags that are leaking

shnburn

bump

shnburn

bump €60

shnburn

open to offers

shabba87

have a beretta m9 here if u interested in my thread

shnburn

shabba87 wrote: »

have a beretta m9 here if u interested in my thread

is everything working on it how Many mags

shabba87

perfect a minth old with 3 mags i could do it for that and the 1911 u have >

shnburn

shabba87 wrote: »

perfect a minth old with 3 mags i could do it for that and the 1911 u have >

no thanks and 1911 was traded for the kp 06

shabba87

i can do the kp and 30e then if u want?

shnburn

shabba87 wrote: »

i can do the kp and 30e then if u want?

u mean the m9 the 30 ur or my way kinda broke after buying a new rifle

shabba87

well if u can throw in somethin to bring it up a bit

shnburn

shabba87 wrote: »

well if u can throw in somethin to bring it up a bit

iv nothing i can add in since i had to add my viper holster to get what i thought was a fully working kp 06 im open to cash offers tho just want it gone

shabba87

ah ok dont worry so i just neded a few bits off it really if u change ur mind let me know

shnburn

shabba87 wrote: »

ah ok dont worry so i just neded a few bits off it really if u change ur mind let me know

i could add q 450 rnd gng m4 mag with kp 06 for the m9 an mags

shabba87

have no use no m4 lad

shnburn

bump

shnburn

4o including post would be a good pistol for someone who nows how to fix it

shnburn

bump

shnburn

shnburn wrote: »

4o including post would be a good pistol for someone who nows how to fix it

bump

shnburn

bump

shabba87

i have a nice trijicon red dot i can trade u ?

shnburn

shabba87 wrote: »

i have a nice trijicon red dot i can trade u ?

id have no use for it sorry but am looking for m4 pmags or m203

shnburn

bump

shnburn

bump

shnburn

bump 40 euro

shnburn

Bump

shnburn

shnburn wrote: »

bump 40 euro

Bump

shnburn

Bump