Schmidt & Bender 6X42 zeroing

stef22

Guys, i have an S&B scope that lost the zero.
struggling with the windage and elevation settings , anybody knows the value of one click ? cannot find any information anywhere.
Also trying to find out if clockwise or counter clockwise goes up or down / right or left.
Many thanks

stef22

OK finally found out that the scope is 1/4 MOA so 4 clicks is 1 MOA
so 1 MOA at 100 yards is 1"

one thing i cannot find , is it Clockwise or counter clockwise for elevation to go go up / down and windage go right / left ?

deerhunter1

stef22 wrote: »

Guys, i have an S&B scope that lost the zero.
struggling with the windage and elevation settings , anybody knows the value of one click ? cannot find any information anywhere.
Also trying to find out if clockwise or counter clockwise goes up or down / right or left.
Many thanks

I think your scope is in meters not inches as it is a European scope, very little in
the difference though

Mackcon

Look through your scope and dial , right should bring the crosshairs down and in doing that the bullet up

stef22

Thanks guys
yes you are right i think i click is 1cm / 100 m

daithi55

its one cm on my swarovski at 100 should be wrote on the dials

One shot on kill

Most certainly should be wrote on the dials.

If your looking troughs your scope you shod see your cross hairs moving when you turn the dials. A good few clicks no just one or two.

Longranger

I have an old S&B 6X42 and it's 1 click per cm at 100m.

deerhunter1

Longranger wrote: »

I have an old S&B 6X42 and it's 1 click per cm at 100m.

That is exactly what it is