Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Fire retardant sheeting (trying to find correct name)

  • 13-01-2014 9:00pm
    #1
    Registered Users, Registered Users 2 Posts: 10,209 ✭✭✭✭


    Sorry if this is in the wrong thread...

    Basically i'm looking for the proper name for the following...
    It's a fire retardant sheeting / insulation / sound-proofing.
    It's comes in semi-rigid sheets that can be cut easily with a saw
    The last stuff I saw was about 1" - 1.5" thick
    It has an adhesive on one side and foil on the other

    I'm fitting this to the engine bay of a boat as it's a requirement for insurance (it was already on the last boat)

    Despite Googling for the last half hour, I can't seem to find it as i'm obviously not searching using correct keywords.

    Any ideas anyone? Cheers


Comments

  • Moderators, Motoring & Transport Moderators, Sports Moderators Posts: 6,344 Mod ✭✭✭✭fergal.b


    Hi John I think this will do you http://www.chmarine.com/acatalog/Halyard_Marine_Sound_Insulation.html not cheep :eek: You can also get stuff on a roll from a motor factors that goes under the bonnet that might be cheeper.




    .


  • Registered Users, Registered Users 2 Posts: 25 findersteve


    I used to use this stuff in Australia when Fire rating the Lift shafts in apartment complex's. If its good enough for australian fire regs it should be good enough for a firewall for an enginebay.
    Its rated at one hour fire resistance. You would need to apply with fire rated caulking.

    http://www.mcmahons.ie/plasterboard-fireline-2400x1200x15mm.html


  • Closed Accounts Posts: 556 ✭✭✭ligertigon


    try hardiebacker board. rightprice tiles have 6mm stuff thats used for stoves about €12, many diy places sell concrete particle board (rougher finish) 12mm 8x4 sheets about €50. b&q stock it too.
    these boards are 100% fire proof, though may crack with vibration if not fixed ridgid to the hull, albeit they stay together.


  • Closed Accounts Posts: 3,059 ✭✭✭WilyCoyote


    Hardiebacker Board is fire-proof but will not insulate. I've seen it used over Bar-B-Q pits to stop pots/pans getting sooted up.
    Because of the heat transfer it's not 1 hr rated. I imagine if you put 2 X 1/2" Gypsum Fireline board behind it, you may get what you need. Why not ask your insurance company!


  • Registered Users, Registered Users 2 Posts: 76 ✭✭Scudges Da


    It's called Firebatt....details here http://www.fireseal.ie/products/firestopping/


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 10,209 ✭✭✭✭JohnCleary


    In the end I went with a purpose-made product, Maritex.

    Glad I did, it's the business!


Advertisement