Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.

https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Samsung Horizon box configuration

janja · 2013-11-09 16:48:14

I want to port forward to access i.p cams remotely and I have entered in the LAN i.p for the cam and the port to open and have enabled upnp and still cannot gain access pathway , any idea folks. Any help would be much appreciated.

09-11-2013 05:48PM

#1

janja

Registered Users, Registered Users 2 Posts: 412 ✭✭

Join Date: April 2010

Posts: 342

I want to port forward to access i.p cams remotely and I have entered in the LAN i.p for the cam and the port to open and have enabled upnp and still cannot gain access pathway , any idea folks. Any help would be much appreciated.

0

Comments

#2 10-11-2013 05:57PM

Mr. G

Moderators, Technology & Internet Moderators Posts: 4,622 Mod ✭✭✭✭

Join Date: August 2010

Posts: 4192

You need to forward the port 80 to the ip camera/dvr.

I would setup a static ip address for the dvr though before forwarding it. If the ip cameras/dvr uses https instead of http use 443 instead of port 80.

What cameras/dvr is it? You may need to forward other ports.

0
#3 11-11-2013 02:34PM

janja

Registered Users, Registered Users 2 Posts: 412 ✭✭

Join Date: April 2010

Posts: 342

Thanks Mr G but I could configure it on my previous Cisco router but cannot on the replacement Horizon samsung

0
#4 13-11-2013 11:56PM

MAJJ

Registered Users, Registered Users 2 Posts: 1,679 ✭✭✭

Join Date: July 2006

Posts: 1548

This should help

http://www.boards.ie/vbulletin/showthread.php?t=2057019853

0