Wheeler Professional Reticle Leveling System

FISMA

Before you level your scope, your rifle must be level. That's where this handy kit from the makers of the Fat Wrench comes in.

There's not much point in leveling a scope that sits on a rifle that is not level. If you are like myself, you may not notice the problem at 100 or 200 yards, especially shooting hot rounds. However, when you see your groups open at 300 and disappear at 400, you'll begin to wonder what went wrong.

I haven't seen these kits much in Ireland, however, I now have a few friends/family who swear by them.

This is not a bore sighter, which I consider a luxury. Instead, this leveling system gets the rifle precisely leveled, which is a necessity, not a luxury.

Here is the link to the Reticle Kit at Wheeler's Website

here is a bit from Sportsman's Guide on YouTube.

Price €50

Note: if the LRS has to be shipped, you will have to pay for the shipping and insurance.

Below is a blurb from Wheeler

Product Description
Wheeler Professional Reticle Leveling System
The Wheeler Professional Reticle Leveling System is a precision tool and technique designed to allow a scope to be perfectly leveled on any firearm with ease. CNC machining, factory adjusted calibration set screws, anodized aluminum construction and protective molded case put this instrument in a class like no other.

Technological advances in today's modern firearms, ammunition and optics have enhanced the potential for long range accuracy. However, precision mounting and alignment of your system's scope is critical to realizing the accuracy. A scope's reticle must be aligned precisely with the weapon to ensure holdover or turret adjustments for bullet drop produce true vertical compensation for point of impact. If the crosshairs are canted left or right both elevation and windage bullet impact error will occur.

The Professional Reticle Leveling System is comprised of two machined aluminum level housings calibrated to their integrated levels. The Barrel Clamp Level is attached to the firearm’s barrel while the smaller Reference Level is placed on the scope base, bottom half of a ring or other flat surface perpendicular to the vertical axis of the gun. The gun is then rotated until the Reference Level is aligned. The tuning adjustment knob on the Barrel Clamp Level is turned until its level is centered to match the Reference Level. At this point the Barrel Clamp Level is calibrated to the guns axis. The Scope can be installed loosely and the Reference Level placed on top of the scopes turret cap. The scope is rotated until the Reference Level is aligned with the Barrel Clamp Level and then simply secured in place. The Wheeler Professional Reticle Leveling System is the most effective instrument available for precision scope alignment. Easy and accurate.

Features:

• Precision tool for scope reticle alignment Factory calibrated Reference Level
• Maximize accuracy potential Tunable Barrel Clamp Level
• CNC machined aluminum level housings Protective storage case

FISMA

Last call.

lefthooker

€40 posted tempt ya???

FISMA

lefthooker wrote: »

€40 posted tempt ya???

Thanks for the offer lefthooker, but I am going to hold on this one.