temporary 18350 mod

Themadhouse

I need a temporary mod, one that will take an 18350 battery.
I need it to be very discrete and as small as possible in height. I will be putting a vivi on top so 510 connection.
I'm not looking for anything pricey just something that will do the job for a few days. It doesnt have to be pretty.
Any ideas? Ideally I would like something as small as a gp paps.

Mr. Chrome

If you can wait 3(ish) weeks for delivery, check out fasttech. They have decent enough mods for 13(ish)euros.
The paps is around 58mm, dont know of anything that small for small money! :-)

grindle

Smallest and cheap-ish but not the cheapest @ €25.

Cheapest @ €10.99 but would look ugly unless the clearo had an ego-skirt.
9mm taller than the Vision Slip.
Beauty ring might make it look slightly less ugly with a Vivi, but that brings the cost up and I'm betting it'll still look a bit off.
Or
http://www.e-smokeireland.eu/product-p/udtl.htm
http://www.vaperus.ie/mod-tubes/172-udt-l-mod.html
One cent dearer @ ESI, suppose it comes down to postage or whomever you might be buying anything else off of in the near future.
Same size as the €10.99 udt-s (80mm).

Themadhouse

Thanks! Vision slip looks decent. :-)

grindle

It does look pretty.
Remember though, none of them are true mech mods, so super low resistances need not apply, I'd go 1.6ohm minimum for those.
If you want a decent proper mech mod for the money the Smok Magneto will be much more solid and futur-proofed, has a low voltage drop. 85mm tall in 18350 mode, plus the version BV has doesn't have any skanky logo on the side.

Themadhouse

Cheers! I just need something that I can use discretely for a few days. Will have a gander at the smok. :-)