Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

l96 shooting troubles

  • 20-09-2013 3:18pm
    #1
    dbmauser
    Registered Users, Registered Users 2 Posts: 79 ✭✭


    having trouble getting accurate and consistent shooting with my well l96.

    using kings arms 0.28 platinum bb's
    4 barrel spacers
    sealed cylinder
    hop up spacer
    6.01 madbull inner barrel


    shooting with next to no wind,all bb's cleaned and checked for flaw's,target is 65ft/22 yards away and static.

    shooting will be bang on with the crosshairs then will start shooting,left,right,up,down etc. by about 6 inches

    shooting on a static object with a bipod and spirit level on the stock for consistent level shot.

    barrel has been cleaned ,polished and cleaned again

    any help appreciated as its driving me mad and ill end up making bits of it with frustration


Comments

  • #2
    YbFocus
    Registered Users, Registered Users 2 Posts: 8,480 ✭✭✭YbFocus


    If your sure the barrel is clean then it must be the hop up man.
    Take it out and check for damage, if it's ok it probably just needs oiling, if not then get a new one. Can't be anything else, unless there is something wrong with your tight bore?


  • #3
    brenak47
    Closed Accounts Posts: 1,446 ✭✭✭brenak47


    If u have cleaned the barrel with hop up unit still on u might of got some polish on the rubber itself. Second option take out the barrel and check that the hop up nub is making level contact with the bb and it hasn't shifted when tightening the hop up unit has happened myself a few time as the hop up unit can be a pain.After that is just make sure everything is cleaned off the inner barrel best thing there is a clean piece of cloth dipped in warm soapy water. Use it and send in about 10 dry pieces after it to make sure u get everything.


Advertisement