CZ .17 Bore Guides

Robotack

I have a quantity of x15 Bore Guides (model #95) specifically for the CZ 452/3/5 in .17 HMR.

They are made in the USA by "Possum Hollow Products" and they are the only suitable bore guide I've found for the CZ Rimfires and believe me I have searched. Their web site is https://www.possumhollowproducts.com/
If you are particular about cleaning your guns as I am, these are essential IMO.

They are machined underneath to allow it slot into the CZ rifle. Any of the "universal" ones I've tried fell down here as they won't go past the bit that sticks up in the middle of the bolt. I personally would not attempt to run a rod through that tiny little .17 bore without a guide.

I also have 6 "solvent ports". They are an additional part that plugs onto the end of the guide and are held secure by rubber o-rings. They provide a little extra length to the guide and also a "window" through which to drop in solvent / oil. They are very handy.

The Bore Guides are €28 inc. standard postage to ROI. If you want registered I will have to check how much that'll be.

If you also want a solvent port it's an additional €10, so €38 total.

Collection from North County Dublin is also possible. Buyer pays paypal fees. This is a one time only opportunity; when they're gone they're gone.

Robotack

More pics

sniperman

Robotack wrote: »

I have a quantity of x15 Bore Guides (model #95) specifically for the CZ 452/3/5 in .17 HMR.

They are made in the USA by "Possum Hollow Products" and they are the only suitable bore guide I've found for the CZ Rimfires and believe me I have searched. Their web site is https://www.possumhollowproducts.com/
If you are particular about cleaning your guns as I am, these are essential IMO.

They are machined underneath to allow it slot into the CZ rifle. Any of the "universal" ones I've tried fell down here as they won't go past the bit that sticks up in the middle of the bolt. I personally would not attempt to run a rod through that tiny little .17 bore without a guide.

I also have 6 "solvent ports". They are an additional part that plugs onto the end of the guide and are held secure by rubber o-rings. They provide a little extra length to the guide and also a "window" through which to drop in solvent / oil. They are very handy.

The Bore Guides are €28 inc. standard postage to ROI. If you want registered I will have to check how much that'll be.

If you also want a solvent port it's an additional €10, so €38 total.

Collection from North County Dublin is also possible. Buyer pays paypal fees. This is a one time only opportunity; when they're gone they're gone.

hi,might be a silly question,but will they fit a 455 cz hmr,and would i have to get the solvent port,or would the guide be fine without it?thanks

Robotack

It's perfect for the 455. The solvent port is an extra. I find it handy but it'll work fine without it.

sniperman

Robotack wrote: »

It's perfect for the 455. The solvent port is an extra. I find it handy but it'll work fine without it.

sending pm

Robotack

Bump

Robotack

Bump

ronn

Robotack wrote: »

Bump

I'll take a bore guide

Robotack

ronn wrote: »

I'll take a bore guide

Great, thanks...
I'll send you a pm with paypal details. Let me know if you'd like one of the solvent ports too.
Cheers.

Robotack

Bump... get 'em while you can!

Robotack

Any more takers??

Robotack

Price reduced to €25.... I've only a few solvent ports left. If you want one it'll be €7 extra. Reduced to sell.... These guides are ESSENTIAL if you own a CZ .17 and intend on looking after it!

Robotack

bump

aclusk

Hi have you still got these available..PM sent

Robotack

Thanks for your purchase aclusk....
Folks, these are ESSENTIAL for propper rifle cleaning. Get 'em now while there's a few left!

Robotack

Bump. Still a few left. Use a bore guide or risk destroying that delicate .17 rifling.

Robotack

Bump

nedcbr6

Hi Robotack just seeing if you still have the bore guide and the solvent port
Cheerz

Robotack wrote: »

Bump. Still a few left. Use a bore guide or risk destroying that delicate .17 rifling.

Robotack

Yes I still have both items.

nedcbr6

How much for the 2 and P&P ??
Cheerz

Robotack wrote: »

Yes I still have both items.

Robotack

nedcbr6 wrote: »

How much for the 2 and P&P ??
Cheerz

32 all in

Robotack

Solvent ports now all gone.... Just a handful of bore guides remaining.

Robotack

Last few!...

Robotack

Only 3 left... last chance to properly maintain your cz .17.

Robotack

Bump