Help needed, Res/combo is not out putting water

bladesofglory

Hi People

my res 1 x Koolance RP-452X2 Dual 5.25" Reservoir for 1-2 PMP-450/S D5 Pump doesnt seem to be out putting water from the outlet, i can hear the pump but nohtin is coming from the outlet

help needed?????

game4it70

First thing to do is NOT to run pump dry as it will kill it!!

Do you have the speed dial on setting 5?

bladesofglory

game4it70 wrote: »

First thing to do is NOT to run pump dry as it will kill it!!

Do you have the speed dial on setting 5?

Yes mate, It filled ith coolant but nothin happening

game4it70

Try tillting the pc around as the might be air trapped in the pump.
Are you using the aurora or normal coolant?

bladesofglory

game4it70 wrote: »

Try tillting the pc around as the might be air trapped in the pump.
Are you using the aurora or normal coolant?

Im using mayhem coolant?? is that ok

still no join whatso ever

game4it70

I've read that the res is a nightmare to bleed.Mayhems aurora might not be the best thing to use with that res.I've not used it but it does look thicker than normal coolant.
You will have a lot of hassle soon as its only meant to be used for a short time when you need to change it with the size of your loop.

As for the pump i presume its being powered by a 4 pin molex directly from psu?
When you turned it on for the first time how long did you run it dry for?

Double check your pump is installed correctly and when using a single pump that you dont need to use a certain side of the res.

I would even try blowing into the tube that goes into the res inlet to try push some liquid into the pump.

Wouldn't be any harm to take a pic of it either.

bladesofglory

game4it70 wrote: »

I've read that the res is a nightmare to bleed.Mayhems aurora might not be the best thing to use with that res.I've not used it but it does look thicker than normal coolant.
You will have a lot of hassle soon as its only meant to be used for a short time when you need to change it with the size of your loop.

As for the pump i presume its being powered by a 4 pin molex directly from psu?
When you turned it on for the first time how long did you run it dry for?

Double check your pump is installed correctly and when using a single pump that you dont need to use a certain side of the res.

I would even try blowing into the tube that goes into the res inlet to try push some liquid into the pump.





Wouldn't be any harm to take a pic of it either.

Thanks Mate

Also I installed 4 ssd in raid o using the lsi controller but I cant find them hen trying to install windows, ehat do you recon is the prob??? Mobo is asrock extreme 11??

game4it70

bladesofglory wrote: »

Thanks Mate

Also I installed 4 ssd in raid o using the lsi controller but I cant find them hen trying to install windows, ehat do you recon is the prob??? Mobo is asrock extreme 11??

Not got a clue about raid as i've never used it sorry

Did you get the pump working then?

bladesofglory

game4it70 wrote: »

Not got a clue about raid as i've never used it sorry

Did you get the pump working then?

No I havent got the pump working, just currently runing it on sa corsair unit,

btkm8unsl0w5r4

You will need to install the raid controller drivers forma USB when installing windows, there are options to do that. The drivers will be on the disk that came with the mobo.