wanted: drop bars 42cm 25.4mm clamp

Hmmzis

I've managed to bend my current ones and before going for a new set of bars and stem was wondering if anyone has something like that in the shed waiting to be sold.

The non- roundy variety would be preferable since that's what's on the bike now.

42cm c-c for a 25.4mm stem clamp.

Budget is low, very low. Based in south Dublin, can collect.

crumliniano

I have a pair of Ritchie Alu 6061 bars. they are anatomical bend (I think that's what you mean by non-roundy). I'm not sure about your stem clamp measurements though. I thought that was a fairly standard thing and measuring these they look to be in or around 190mm circumference. I also have the stem, 100mm 6 degree bend I think. €20 for the bars, €10 for the stem if you want it too. Collected in Dublin.
Some pics:
PIC1
PIC2
Pic3

Hmmzis

Hey crumliniano, thanks, very interested. From the pics it looks like exactly what I'm after. The 25.4mm is the inside clamp diameter of the stem and the diameter of the bars at clamping point. Most bars would have that number printed on somewhere, on my ones it's covered by the stem's face plate.

If the diameter is right I'll gladly take the bars.

crumliniano

It's not printed anywhere and I don't have a vernier calipers, but holding a measuring tape beside the bars and squinting it looks like 25.something so I reckon it's right. You're more than welcome to try and fit it. I'll PM you my number to arrange viewing/collection. Cheers.

Squidgy Black

Odds are those Ritchey bars are 26mm clamps, very few modern bars come with a 25.4mm clamp as that's MTB clamp size.

Hmmzis

Thanks crunliniano, nice dealing with you.

Mods: thread can be locked now, thanks.