Ubuntu ram issue.

JJJJNR

I have a PC w/ ASrock 970 extreme 3 (AMD) that has 16GB ram, yet when I go to my OS (ubuntu) it will only see 8GB, but when I fire a command at the OS it reports that there are 16GB ram as does the bios, but it is not "released" to the OS..

its the 64bit version of 12.04, I'm currently doing some lab work on KVM and really need the additional 8GB

Any ideas!

Khannie

Check your bios settings for sure. I had weird missing ram issue recently and it was bios based.

PrzemoF

OP, open a terminal, type "free" and send back the results here.

JJJJNR

This is the result I get from free :

total used free shared buffers cached
Mem: 8157456 2269860 5887596 0 82032 906896
-/+ buffers/cache: 1280932 6876524
Swap: 8365052 0 8365052

boomslang

you might want to ask this question in the ubuntu forums too, perhaps in the hardware section

PrzemoF

Could that be your problem(last post):
http://ubuntuforums.org/showthread.php?p=11068190

another one with "dirty" contacts:

http://rog.asus.com/forum/showthread.php?3042-BIOS-says-16gb-installed-but-only-8gb-recognized

If not, send "dmesg" and "sudo lshw" output.

JJJJNR

dmesg

[ 8.511561] usb 8-1: Not enough bandwidth for altsetting 1
[ 8.511563] 2:3:1: usb_set_interface failed (-22)
[ 8.511940] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 8.511945] usb 8-1: Not enough bandwidth for altsetting 1
[ 8.511946] 2:3:1: usb_set_interface failed (-22)
[ 8.512487] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 8.512491] usb 8-1: Not enough bandwidth for altsetting 1
[ 8.512493] 2:3:1: usb_set_interface failed (-22)
[ 8.512536] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 8.512539] usb 8-1: Not enough bandwidth for altsetting 1
[ 8.512540] 2:3:1: usb_set_interface failed (-22)
[ 8.512644] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 8.512651] usb 8-1: Not enough bandwidth for altsetting 1
[ 8.512653] 2:3:1: usb_set_interface failed (-22)
[ 8.512973] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 8.512979] usb 8-1: Not enough bandwidth for altsetting 1
[ 8.512980] 2:3:1: usb_set_interface failed (-22)
[ 8.513359] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 8.513363] usb 8-1: Not enough bandwidth for altsetting 1
[ 8.513364] 2:3:1: usb_set_interface failed (-22)
[ 38.144540] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.144548] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.144550] 2:3:1: usb_set_interface failed (-22)
[ 38.144582] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.144585] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.144586] 2:3:1: usb_set_interface failed (-22)
[ 38.144629] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.144634] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.144636] 2:3:1: usb_set_interface failed (-22)
[ 38.144949] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.144953] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.144955] 2:3:1: usb_set_interface failed (-22)
[ 38.145161] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.145165] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.145166] 2:3:1: usb_set_interface failed (-22)
[ 38.145473] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.145477] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.145479] 2:3:1: usb_set_interface failed (-22)
[ 38.145513] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.145517] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.145518] 2:3:1: usb_set_interface failed (-22)
[ 38.145556] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.145559] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.145560] 2:3:1: usb_set_interface failed (-22)
[ 38.145719] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.145722] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.145723] 2:3:1: usb_set_interface failed (-22)
[ 38.145894] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.145897] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.145898] 2:3:1: usb_set_interface failed (-22)
[ 38.146278] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.146284] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.146286] 2:3:1: usb_set_interface failed (-22)
[ 38.146340] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.146345] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.146346] 2:3:1: usb_set_interface failed (-22)
[ 38.146443] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.146446] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.146448] 2:3:1: usb_set_interface failed (-22)
[ 38.146643] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.146646] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.146648] 2:3:1: usb_set_interface failed (-22)
[ 38.146865] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.146868] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.146870] 2:3:1: usb_set_interface failed (-22)
[ 38.147315] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.147319] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.147321] 2:3:1: usb_set_interface failed (-22)
[ 38.147362] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.147365] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.147366] 2:3:1: usb_set_interface failed (-22)
[ 38.147458] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.147461] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.147462] 2:3:1: usb_set_interface failed (-22)
[ 38.147644] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.147647] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.147648] 2:3:1: usb_set_interface failed (-22)
[ 38.147872] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.147875] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.147876] 2:3:1: usb_set_interface failed (-22)
[ 38.334516] audit_printk_skb: 45 callbacks suppressed
[ 38.334520] type=1400 audit(1368792537.729:26): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=2096 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 38.416533] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.416543] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.416545] 2:3:1: usb_set_interface failed (-22)
[ 38.416624] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.416628] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.416629] 2:3:1: usb_set_interface failed (-22)
[ 38.416672] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.416675] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.416677] 2:3:1: usb_set_interface failed (-22)
[ 38.417014] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.417018] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.417019] 2:3:1: usb_set_interface failed (-22)
[ 38.417335] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.417348] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.417352] 2:3:1: usb_set_interface failed (-22)
[ 38.417747] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.417752] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.417754] 2:3:1: usb_set_interface failed (-22)
[ 38.417785] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.417789] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.417791] 2:3:1: usb_set_interface failed (-22)
[ 38.417832] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.417836] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.417838] 2:3:1: usb_set_interface failed (-22)
[ 38.418114] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.418119] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.418120] 2:3:1: usb_set_interface failed (-22)
[ 38.418357] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.418362] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.418364] 2:3:1: usb_set_interface failed (-22)
[ 38.418805] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.418810] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.418812] 2:3:1: usb_set_interface failed (-22)
[ 38.418863] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.418867] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.418869] 2:3:1: usb_set_interface failed (-22)
[ 38.418983] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.418987] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.418989] 2:3:1: usb_set_interface failed (-22)
[ 38.419249] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.419253] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.419255] 2:3:1: usb_set_interface failed (-22)
[ 38.422328] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.422334] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.422337] 2:3:1: usb_set_interface failed (-22)
[ 38.422945] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.422950] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.422952] 2:3:1: usb_set_interface failed (-22)
[ 38.423003] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.423007] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.423009] 2:3:1: usb_set_interface failed (-22)
[ 38.423126] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.423130] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.423132] 2:3:1: usb_set_interface failed (-22)
[ 38.423415] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.423419] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.423421] 2:3:1: usb_set_interface failed (-22)
[ 38.423702] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.423706] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.423708] 2:3:1: usb_set_interface failed (-22)
[ 38.444290] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.444301] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.444304] 2:3:1: usb_set_interface failed (-22)
[ 38.444345] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.444349] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.444351] 2:3:1: usb_set_interface failed (-22)
[ 38.444398] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.444402] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.444404] 2:3:1: usb_set_interface failed (-22)
[ 38.444852] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.444856] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.444858] 2:3:1: usb_set_interface failed (-22)
[ 38.445115] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.445119] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.445120] 2:3:1: usb_set_interface failed (-22)
[ 38.445458] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.445463] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.445465] 2:3:1: usb_set_interface failed (-22)
[ 38.445502] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.445505] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.445507] 2:3:1: usb_set_interface failed (-22)
[ 38.445553] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.445558] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.445560] 2:3:1: usb_set_interface failed (-22)
[ 38.445893] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.445898] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.445900] 2:3:1: usb_set_interface failed (-22)
[ 38.446154] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.446158] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.446160] 2:3:1: usb_set_interface failed (-22)
[ 38.446586] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.446592] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.446594] 2:3:1: usb_set_interface failed (-22)
[ 38.446646] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.446650] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.446652] 2:3:1: usb_set_interface failed (-22)
[ 38.446768] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.446772] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.446773] 2:3:1: usb_set_interface failed (-22)
[ 38.447018] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.447023] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.447024] 2:3:1: usb_set_interface failed (-22)
[ 38.447298] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.447303] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.447304] 2:3:1: usb_set_interface failed (-22)
[ 38.447882] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.447886] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.447888] 2:3:1: usb_set_interface failed (-22)
[ 38.447939] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.447943] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.447945] 2:3:1: usb_set_interface failed (-22)
[ 38.448065] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.448069] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.448071] 2:3:1: usb_set_interface failed (-22)
[ 38.448315] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.448319] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.448321] 2:3:1: usb_set_interface failed (-22)
[ 38.448596] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.448601] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.448602] 2:3:1: usb_set_interface failed (-22)
[ 38.471674] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.471686] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.471689] 2:3:1: usb_set_interface failed (-22)
[ 38.471735] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.471745] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.471749] 2:3:1: usb_set_interface failed (-22)
[ 38.471830] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.471835] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.471836] 2:3:1: usb_set_interface failed (-22)
[ 38.472186] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.472190] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.472192] 2:3:1: usb_set_interface failed (-22)
[ 38.472433] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.472436] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.472438] 2:3:1: usb_set_interface failed (-22)
[ 38.472771] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.472777] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.472779] 2:3:1: usb_set_interface failed (-22)
[ 38.472809] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.472812] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.472814] 2:3:1: usb_set_interface failed (-22)
[ 38.472855] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.472859] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.472860] 2:3:1: usb_set_interface failed (-22)
[ 38.473042] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.473045] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.473047] 2:3:1: usb_set_interface failed (-22)
[ 38.473445] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.473450] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.473452] 2:3:1: usb_set_interface failed (-22)
[ 38.473854] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.473859] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.473861] 2:3:1: usb_set_interface failed (-22)
[ 38.473908] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.473912] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.473913] 2:3:1: usb_set_interface failed (-22)
[ 38.474023] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.474031] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.474033] 2:3:1: usb_set_interface failed (-22)
[ 38.474428] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.474431] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.474433] 2:3:1: usb_set_interface failed (-22)
[ 38.474686] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.474692] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.474694] 2:3:1: usb_set_interface failed (-22)
[ 38.475317] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.475322] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.475324] 2:3:1: usb_set_interface failed (-22)
[ 38.475377] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.475381] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.475382] 2:3:1: usb_set_interface failed (-22)
[ 38.475505] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.475509] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.475511] 2:3:1: usb_set_interface failed (-22)
[ 38.475803] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.475808] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.475810] 2:3:1: usb_set_interface failed (-22)
[ 38.476113] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.476117] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.476120] 2:3:1: usb_set_interface failed (-22)
[ 38.498140] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.498152] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.498155] 2:3:1: usb_set_interface failed (-22)
[ 38.498525] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.498530] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.498532] 2:3:1: usb_set_interface failed (-22)
[ 38.498579] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.498583] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.498584] 2:3:1: usb_set_interface failed (-22)
[ 38.498933] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.498936] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.498938] 2:3:1: usb_set_interface failed (-22)
[ 38.499174] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.499177] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.499178] 2:3:1: usb_set_interface failed (-22)
[ 38.499512] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.499516] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.499518] 2:3:1: usb_set_interface failed (-22)
[ 38.499549] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.499552] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.499553] 2:3:1: usb_set_interface failed (-22)
[ 38.499592] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.499595] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.499596] 2:3:1: usb_set_interface failed (-22)
[ 38.499765] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.499768] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.499769] 2:3:1: usb_set_interface failed (-22)
[ 38.499970] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.499973] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.499974] 2:3:1: usb_set_interface failed (-22)
[ 38.500333] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.500337] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.500339] 2:3:1: usb_set_interface failed (-22)
[ 38.500384] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.500388] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.500389] 2:3:1: usb_set_interface failed (-22)
[ 38.500487] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.500490] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.500492] 2:3:1: usb_set_interface failed (-22)
[ 38.500704] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.500707] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.500709] 2:3:1: usb_set_interface failed (-22)
[ 38.500963] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.500966] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.500968] 2:3:1: usb_set_interface failed (-22)
[ 38.501491] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.501495] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.501497] 2:3:1: usb_set_interface failed (-22)
[ 38.501546] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.501550] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.501552] 2:3:1: usb_set_interface failed (-22)
[ 38.501656] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.501660] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.501661] 2:3:1: usb_set_interface failed (-22)
[ 38.501878] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.501881] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.501883] 2:3:1: usb_set_interface failed (-22)
[ 38.502139] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.502143] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.502144] 2:3:1: usb_set_interface failed (-22)
[ 38.521138] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.521148] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.521150] 2:3:1: usb_set_interface failed (-22)
[ 38.521195] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.521201] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.521202] 2:3:1: usb_set_interface failed (-22)
[ 38.521265] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.521278] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.521285] 2:3:1: usb_set_interface failed (-22)
[ 38.521816] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.521819] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.521821] 2:3:1: usb_set_interface failed (-22)
[ 38.522172] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.522175] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.522176] 2:3:1: usb_set_interface failed (-22)
[ 38.522592] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.522596] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.522597] 2:3:1: usb_set_interface failed (-22)
[ 38.522628] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.522631] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.522632] 2:3:1: usb_set_interface failed (-22)
[ 38.522670] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.522672] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.522674] 2:3:1: usb_set_interface failed (-22)
[ 38.522840] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.522843] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.522844] 2:3:1: usb_set_interface failed (-22)
[ 38.523184] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.523189] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.523190] 2:3:1: usb_set_interface failed (-22)
[ 38.523584] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.523589] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.523592] 2:3:1: usb_set_interface failed (-22)
[ 38.523645] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.523649] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.523652] 2:3:1: usb_set_interface failed (-22)
[ 38.523764] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.523768] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.523770] 2:3:1: usb_set_interface failed (-22)
[ 38.524206] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.524210] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.524212] 2:3:1: usb_set_interface failed (-22)
[ 38.524535] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.524542] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.524544] 2:3:1: usb_set_interface failed (-22)
[ 38.525169] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.525176] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.525179] 2:3:1: usb_set_interface failed (-22)
[ 38.525235] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.525240] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.525242] 2:3:1: usb_set_interface failed (-22)
[ 38.525355] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.525359] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.525362] 2:3:1: usb_set_interface failed (-22)
[ 38.525654] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.525658] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.525660] 2:3:1: usb_set_interface failed (-22)
[ 38.525955] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 38.525960] usb 8-1: Not enough bandwidth for altsetting 1
[ 38.525962] 2:3:1: usb_set_interface failed (-22)

JJJJNR

sudo lshw

mmxext fxsr_opt pdpe1gb rdtscp constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 cx16 sse4_1 sse4_2 popcnt aes xsave avx lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 nodeid_msr topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold cpufreq
configuration: cores=6 enabledcores=6 threads=6
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 288KiB
capacity: 288KiB
clock: 1GHz (1.0ns)
capabilities: pipeline-burst internal write-back unified
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 6MiB
capacity: 6MiB
clock: 1GHz (1.0ns)
capabilities: pipeline-burst internal write-back unified
*-cache:2
description: L3 cache
physical id: 7
slot: L3-Cache
size: 8MiB
capacity: 8MiB
clock: 1GHz (1.0ns)
capabilities: pipeline-burst internal write-back unified
*-memory
description: System Memory
physical id: f
slot: System board or motherboard
size: 16GiB
*-bank:0
description: DIMM DDR3 Synchronous 667 MHz (1.5 ns)
product: F3-1333C9-4GAO
vendor: Undefined
physical id: 0
serial: 00000000
slot: A1_DIMM0
size: 4GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:1
description: DIMM DDR3 Synchronous 667 MHz (1.5 ns)
product: F3-1333C9-4GAO
vendor: Undefined
physical id: 1
serial: 00000000
slot: A1_DIMM1
size: 4GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:2
description: DIMM DDR3 Synchronous 667 MHz (1.5 ns)
product: F3-1333C9-4GAO
vendor: Undefined
physical id: 2
serial: 00000000
slot: A1_DIMM2
size: 4GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:3
description: DIMM DDR3 Synchronous 667 MHz (1.5 ns)
product: F3-1333C9-4GAO
vendor: Undefined
physical id: 3
serial: 00000000
slot: A1_DIMM3
size: 4GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: P1.60
date: 06/26/2012
size: 64KiB
capacity: 4032KiB
capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification
*-pci:0
description: Host bridge
product: RD890 PCI to PCI bridge (external gfx0 port
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 100
bus info: pci@0000:00:00.0
version: 02
width: 32 bits
clock: 33MHz
*-pci:0
description: PCI bridge
product: RD890 PCI to PCI bridge (PCI express gpp port D)
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 4
bus info: pci@0000:00:04.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:52 ioport:e000(size=4096) memory:fea00000-feafffff ioport:c0000000(size=268435456)
*-display
description: VGA compatible controller
product: RV620 LE [Radeon HD 3450]
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 0
bus info: pci@0000:01:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=fglrx_pci latency=0
resources: irq:74 memory:c0000000-cfffffff memory:fea20000-fea2ffff ioport:e000(size=256) memory:fea00000-fea1ffff
*-pci:1
description: PCI bridge
product: RD890 PCI to PCI bridge (PCI express gpp port H)
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 9
bus info: pci@0000:00:09.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:53 memory:fe900000-fe9fffff
*-usb
description: USB controller
product: EJ168 USB 3.0 Host Controller
vendor: Etron Technology, Inc.
physical id: 0
bus info: pci@0000:02:00.0
version: 01
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
resources: irq:72 memory:fe900000-fe907fff
*-storage
description: SATA controller
product: SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 11
bus info: pci@0000:00:11.0
version: 40
width: 32 bits
clock: 66MHz
capabilities: storage ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=32
resources: irq:19 ioport:f090(size=8) ioport:f080(size=4) ioport:f070(size=8) ioport:f060(size=4) ioport:f050(size=16) memory:feb0b000-feb0b3ff
*-usb:0
description: USB controller
product: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 12
bus info: pci@0000:00:12.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci_hcd latency=32
resources: irq:18 memory:feb0a000-feb0afff
*-usb:1
description: USB controller
product: SB7x0/SB8x0/SB9x0 USB EHCI Controller
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 12.2
bus info: pci@0000:00:12.2
version: 00
width: 32 bits
clock: 66MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci_hcd latency=32
resources: irq:17 memory:feb09000-feb090ff
*-usb:2
description: USB controller
product: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 13
bus info: pci@0000:00:13.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci_hcd latency=32
resources: irq:18 memory:feb08000-feb08fff
*-usb:3
description: USB controller
product: SB7x0/SB8x0/SB9x0 USB EHCI Controller
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 13.2
bus info: pci@0000:00:13.2
version: 00
width: 32 bits
clock: 66MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci_hcd latency=32
resources: irq:17 memory:feb07000-feb070ff
*-serial
description: SMBus
product: SBx00 SMBus Controller
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 14
bus info: pci@0000:00:14.0
version: 42
width: 32 bits
clock: 66MHz
configuration: driver=piix4_smbus latency=0
resources: irq:0
*-ide
description: IDE interface
product: SB7x0/SB8x0/SB9x0 IDE Controller
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 14.1
bus info: pci@0000:00:14.1
version: 40
width: 32 bits
clock: 66MHz
capabilities: ide bus_master
configuration: driver=pata_atiixp latency=32
resources: irq:17 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:f000(size=16)
*-multimedia
description: Audio device
product: SBx00 Azalia (Intel HDA)
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 14.2
bus info: pci@0000:00:14.2
version: 40
width: 64 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=snd_hda_intel latency=32
resources: irq:16 memory:feb00000-feb03fff
*-isa
description: ISA bridge
product: SB7x0/SB8x0/SB9x0 LPC host controller
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 14.3
bus info: pci@0000:00:14.3
version: 40
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
configuration: latency=0
*-pci:2
description: PCI bridge
product: SBx00 PCI to PCI Bridge
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 14.4
bus info: pci@0000:00:14.4
version: 40
width: 32 bits
clock: 66MHz
capabilities: pci subtractive_decode bus_master vga_palette
*-usb:4
description: USB controller
product: SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 14.5
bus info: pci@0000:00:14.5
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci_hcd latency=32
resources: irq:18 memory:feb06000-feb06fff
*-pci:3
description: PCI bridge
product: SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 15
bus info: pci@0000:00:15.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:16
*-pci:4
description: PCI bridge
product: SB900 PCI to PCI bridge (PCIE port 3)
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 15.3
bus info: pci@0000:00:15.3
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:16 ioport:d000(size=4096) ioport:d0000000(size=1048576)
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:05:00.0
logical name: eth0
version: 06
serial: bc:5f:f4:21:df:f8
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.1.14 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
resources: irq:73 ioport:d000(size=256) memory:d0004000-d0004fff memory:d0000000-d0003fff
*-usb:5
description: USB controller
product: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 16
bus info: pci@0000:00:16.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci_hcd latency=32
resources: irq:18 memory:feb05000-feb05fff
*-usb:6
description: USB controller
product: SB7x0/SB8x0/SB9x0 USB EHCI Controller
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 16.2
bus info: pci@0000:00:16.2
version: 00
width: 32 bits
clock: 66MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci_hcd latency=32
resources: irq:17 memory:feb04000-feb040ff
*-pci:1
description: Host bridge
product: Family 15h Processor Function 0
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 101
bus info: pci@0000:00:18.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:2
description: Host bridge
product: Family 15h Processor Function 1
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 102
bus info: pci@0000:00:18.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:3
description: Host bridge
product: Family 15h Processor Function 2
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 103
bus info: pci@0000:00:18.2
version: 00
width: 32 bits
clock: 33MHz
*-pci:4
description: Host bridge
product: Family 15h Processor Function 3
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 104
bus info: pci@0000:00:18.3
version: 00
width: 32 bits
clock: 33MHz
configuration: driver=k10temp
resources: irq:0
*-pci:5
description: Host bridge
product: Family 15h Processor Function 4
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 105
bus info: pci@0000:00:18.4
version: 00
width: 32 bits
clock: 33MHz
configuration: driver=fam15h_power
resources: irq:0
*-pci:6
description: Host bridge
product: Family 15h Processor Function 5
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 106
bus info: pci@0000:00:18.5
version: 00
width: 32 bits
clock: 33MHz
*-scsi:0
physical id: 1
logical name: scsi0
capabilities: emulated
*-disk
description: ATA Disk
product: WDC WD2002FAEX-0
vendor: Western Digital
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: 05.0
serial: WD-WCAY01125305
size: 1863GiB (2TB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=0000979e
*-volume
description: Windows NTFS volume
physical id: 1
bus info: scsi@0:0.0.0,1
logical name: /dev/sda1
version: 3.1
serial: 18a5-5a16
size: 1863GiB
capacity: 1863GiB
capabilities: primary ntfs initialized
configuration: clustersize=4096 created=2013-05-08 16:35:44 filesystem=ntfs state=clean
*-scsi:1
physical id: 2
logical name: scsi1
capabilities: emulated
*-disk
description: ATA Disk
product: M4-CT128M4SSD2
physical id: 0.0.0
bus info: scsi@1:0.0.0
logical name: /dev/sdb
version: 0009
serial: 00000000114808FF7500
size: 119GiB (128GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=000d2976
*-volume:0
description: EXT4 volume
vendor: Linux
physical id: 1
bus info: scsi@1:0.0.0,1
logical name: /dev/sdb1
logical name: /
version: 1.0
serial: 71622de9-e558-4110-9280-8a4c70cc33a8
size: 111GiB
capacity: 111GiB
capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2013-05-03 11:42:27 filesystem=ext4 lastmountpoint=/ modified=2013-05-03 11:54:31 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2013-05-17 13:06:47 state=mounted
*-volume:1
description: Extended partition
physical id: 2
bus info: scsi@1:0.0.0,2
logical name: /dev/sdb2
size: 8169MiB
capacity: 8169MiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux swap / Solaris partition
physical id: 5
logical name: /dev/sdb5
capacity: 8169MiB
capabilities: nofs
*-scsi:2
physical id: 3
bus info: usb@2:4
logical name: scsi6
capabilities: emulated scsi-host
configuration: driver=usb-storage
*-disk
description: SCSI Disk
physical id: 0.0.0
bus info: scsi@6:0.0.0
logical name: /dev/sdc
size: 149GiB (160GB)
capabilities: partitioned partitioned:dos
configuration: signature=e4cc7c11
*-volume
description: Windows NTFS volume
physical id: 1
bus info: scsi@6:0.0.0,1
logical name: /dev/sdc1
logical name: /media/NTFS160GB
version: 3.1
serial: be96b19e-859e-9345-89ce-5bd32bc7aefb
size: 149GiB
capacity: 149GiB
capabilities: primary ntfs initialized
configuration: clustersize=4096 created=2012-09-17 21:15:28 filesystem=ntfs label=NTFS160GB mount.fstype=fuseblk mount.options=rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 state=mounted

PrzemoF

OK, that's not the whole dmesg, but there is definitely something wrong. Could you do:

dmesg > /tmp/dmesg_log

and post the content of /tmp/dmesg_log somewhere? (pastebin.com or zip and post here)

lspci, lsusb might be useful as well. I'm going to find if there is a bug filled against your hardware.

PrzemoF

*-memory
description: System Memory
physical id: f
slot: System board or motherboard
size: 16GiB


So there is 16GB, I hope that complete dmesg explains a bit more.

JJJJNR

Hi, thanks for the reply, heres the full log.

JJJJNR

lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (external gfx0 port (rev 02)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port D)
00:09.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port H)
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42)
00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller (rev 40)
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:15.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
00:15.3 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB900 PCI to PCI bridge (PCIE port 3)
00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 5
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV620 LE [Radeon HD 3450]
02:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)

JJJJNR

lsusb
Bus 002 Device 002: ID 11b0:6298 ATECH FLASH TECHNOLOGY
Bus 004 Device 002: ID 04b3:310c IBM Corp. Wheel Mouse
Bus 008 Device 002: ID 045e:075d Microsoft Corp. LifeCam Cinema
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

PrzemoF

http://www.avforums.com/forums/pc-gaming/1654410-hardware-reserved-ram-only-8gb-usable-16gb-solved.html

Does your PC show 16GB in BIOS?

I just found the other tread: http://www.boards.ie/vbulletin/showthread.php?t=2056932726

Read this[1]: it might be motherboard/ram compatibility problem. If you have only 8GB in BIOS the problem is not really linux related, so I might not be able to help.

[1] http://www.techpowerup.com/forums/showthread.php?t=177569

JJJJNR

yeah the bios is seeing the full 16GB. ? really strange I know.

PrzemoF

Have you tried to remove some memory? Maybe one is faulty and then blocks the other 4GB.

Another option is to try memtest+
http://www.memtest.org/
ISOs: http://www.memtest.org/#downiso

JJJJNR

yeah cheers for the reply, have tried memtest and it reports 8gb IIRC ! may have to RMA.

Khannie

Have you the latest bios? I still suspect it's at least potentially a bios issue.

Knasher

I'd say it is some sort of hardware issue. I bought a new CPU cooler a while back and when I was reseating my processor I accidentally managed to damage one of the pins in the socket bed. The result of this was that my computer was able to detect all of my RAM, but only some of the slots worked. While the BIOS showed the full amount, both Windows and Linux could only use half.

Luckily in my case it was a simple enough matter to bend the pin back and it has worked correctly ever since. In your case I'd recommend checking each RAM stick one by one to see if you can isolate it to a motherboard or RAM issue, and then RMA.

Capt'n Midnight

asking the stupid question ..

with some workstation BIOS's you can mirror RAM so 16GB physical would translate to 8GB usable

as always while troubleshooting weird stuff , load setup defaults / factory reset in the BIOS

croo

first thing I would do is remove & reseat the ram.
I've had experience, when installing new ram, that it seems to be there (reported on boot) but was not recognized by the OS. After much head scratching it turned out that I hadn't correctly installed the new ram modules!

JJJJNR

thanks, does DDR3 need to be put in assigned slots?

croo

JJJJNR wrote: »

thanks, does DDR3 need to be put in assigned slots?

I was thinking/talking about when I installed more memory my laptop(s) and it's different from a desktop but the rule of thumb there was match the colours. The memory slots are usually colour coded - so if you are installing two modules install them in the same colour slots. I see (from your lshw output) you have all four banks full of 4GB modules so that probably doesn't matter.

When I said reseat all I meant was; sometimes the memory module can look like it is installed but it's not 100% if you simply remove it and then replace it making certain it's fully inserted.

But since even the OS believes you have 16GB perhaps the memory is physically correctly installed. Worth a try though - if you've not already removed it and reinstalled.

Johnboy1951

Long way, but might reveal something .....

take out all 4 memory cards and using each one in turn, place it in each slot individually and boot the OS.

You can then do them in pairs and in different paired slots if applicable.

Compare the results .... some differences should show if there is a problem with either a memory slot or a memory card.

Tedious I know ..... particularly all that booting and checking .....