Shower issues

beeceedeecee

Hello
i am having ongoing issues with my shower unit , it is either too hot or too cold , ive changed the thermostat twice with no luck , you can get the temp to where you want it by turning the regulator ever so slightly in either direction , but usually at the expense of some pressure .
I am using an immersion for hot water and cold tank in the attic for cold , because of very bad water pressure i have installed a pump to feed the shower , if its not the thermostat , what else could be the issue ?
Cheers in advance
BRIAN

LIFFY FISHING

What make is you shower ? Stick up a pic... it tells 1000 words

beeceedeecee

Hi
its a shower unit by Heritage Showers




Not sure if these photos are what your after ,
CHEERS .

LIFFY FISHING

If the issue has always been like that and from your picture and description it could be reversed plumbed, that would give you those symptoms

blade1

have you a lot of lime in your water?
take off the shower head and run it for a while?
is there hard bits of lime coming out when you do so?

beeceedeecee

LIFFY FISHING wrote: »

If the issue has always been like that and from your picture and description it could be reversed plumbed, that would give you those symptoms

What does reversed plumbed mean , is it an easy fix ?

beeceedeecee

blade1 wrote: »

have you a lot of lime in your water?
take off the shower head and run it for a while?
is there hard bits of lime coming out when you do so?

No issue with lime .

LIFFY FISHING

beeceedeecee wrote: »

What does reversed plumbed mean , is it an easy fix ?

It means hot supply to the cold inlet & cold supply to the hot inlet

beeceedeecee

Ok folks , it doesnt sound to big a job , many thanks for the help .