Wanted: Ritchey WCS 4-Axis Stem for 1 1/4 steerer tube (canyon) 110mm

taddles

Hi, anyone with a Ritchey WCS 4-Axis Stem for 1 1/4 steerer tube (canyon) 110mm stem that they are willing to sell or swap for a 100mm?

Bigserious1

Hi I have a 90mm ritchey WCS 4 axis stem in black for sale if you are interested?

Bought by mistake not understanding it's for a canyon so very little wear.

ricardospeedo

I think I have one €45.00

taddles

Bigserious1 wrote: »

Hi I have a 90mm ritchey WCS 4 axis stem in black for sale if you are interested?

Bought by mistake not understanding it's for a canyon so very little wear.

No has to be 110mm
thanks

taddles

ricardospeedo wrote: »

I think I have one €45.00

Have you any pics?

what condition is it - new/second hand

ricardospeedo

Second hand in good condition

ricardospeedo

Photo

taddles

ricardospeedo wrote: »

Photo

Sorry been away for a few weeks, do you still have stem for sale? would you take €30 for it?

ricardospeedo

taddles wrote: »

Sorry been away for a few weeks, do you still have stem for sale? would you take €30 for it?

No thanks I want 45 for it

DeRosa68

taddles wrote: »

Hi, anyone with a Ritchey WCS 4-Axis Stem for 1 1/4 steerer tube (canyon) 110mm stem that they are willing to sell or swap for a 100mm?

I have a Ritchey WCS 4-Axis Stem for 1 1/4 steerer tube 110mm stem Glossy white with black face plate.
What's the full description of yours?

moveris

Hi, i'm also looking for a Ritchey stem for 1"1/4 steerer tube with a length of 110mm or 120mm. The exact model is Ritchey WCS 4-Axis 44 of 2011, with a squared body, wider 44mm faceplate and bolt spacing, in wet black or wet white color.

Is there someone here interested in selling one in new condition ?

Thanks !

ricardospeedo

have a look at my photo above

moveris

Hi ricardospeedo and thanks for answering. Actually, my preference goes to a wet black or wet white model and in new condition.

As i'm just starting my researchs, i give me again some time and chance to find the exact model i'm looking for.

Nevertheless, i keep your proposal in mind.

Thanks again !

MacG14

Hiya,
I have a Ritchey WCS Carbon Matrix 4 axis 110mm, as new, unmarked, black

It came off my new bike, was too long so have swapped it out for a shorter one.

pm if interested

MacG14

photos of my stem

Brian?

I have this for sale:

http://touch.boards.ie/thread/2056966478/1/#post84975026

And a reasonably new ritchey 110mm stem I could sell for €35 if you're interested.

moveris

Hi Brian?,

I had a look to your pictures ; are you absolutely sure this Oval Concepts stem is a 1"1/4 model ? I already had different propositions but most of the time people forget an important element into the title of this thread : "for 1"1/4 steerer tube".

I know that Ritchey, Giant and Syntace propose this kind of product. I thinks Oval Concepts don't. And my preference goes to the Ritchey brand.

If the Ritchey stem you also propose is a 1"1/4 model, then send me some pictures via PM please.

Thanks a lot !

Brian?

moveris wrote: »

Hi Brian?,

I had a look to your pictures ; are you absolutely sure this Oval Concepts stem is a 1"1/4 model ? I already had different propositions but most of the time people forget an important element into the title of this thread : "for 1"1/4 steerer tube".

I know that Ritchey, Giant and Syntace propose this kind of product. I thinks Oval Concepts don't. And my preference goes to the Ritchey brand.

If the Ritchey stem you also propose is a 1"1/4 model, then send me some pictures via PM please.

Thanks a lot !

Hi the Ritchey stem and the Oval concepts one are exactly the same except the oval concepts one is 120mm and the Ritchey is 110mm.

Have you got a link for exactly what you're looking for or what bike it's going on?



I'll try to get some picture

Brian?

Actually I just did the conversion. 1 1/4 inches is 31.8mm. This is a standard stem size so either the Oval concepts or the Ritchey are the right size.

moveris

Brian? wrote: »

Actually I just did the conversion. 1 1/4 inches is 31.8mm. This is a standard stem size so either the Oval concepts or the Ritchey are the right size.

Thanks for your answer. But maybe there is a confusion :

Because the thing is that a size of 1"1/4 for a steerer tube (upper extremity) is not a standard one ... maybe it will become one, but now it's not yet a regular one. For example, Canyon and Giant are using a top steerer tube of 1"1/4 ; maybe Specialized does that also. They're not that much ...

You're correct for the conversion :

1" : 25,4 mm
1"1/8 : 28,6 mm
1"1/4 : 31,8 mm

When you write "This is a standard stem size so either the Oval concepts or the Ritchey are the right size", are you talking about the steerer tube side or the handlebar side ?

The Oval Concepts stem you're proposing me comes from your Fuji bike which probably has a 1 1/8"U - 1 1/4"L semi-integrated headset.

Now, standard top steerer tube is 1"1/8 and standard handlebar clamping area is 1"1/4 (for what is called "OS handlebar").

For example, as exposed here :

http://www.syntace.com/index.cfm?pid=3&pk=964

The Syntace F119 stem is 1 1/4 inch with a shim for 1 1/8 inch steers. The aluminum shim included is dedicated to downsize steerer to 28,6 millimeters as you can see on the picture here :

http://img163.imageshack.us/img163/8995/syntacef109.jpg

What i need is a Ritchey stem for 1"1/4 steerer tube in new condition with a length of 110mm or 120mm.

The exact model is Ritchey WCS 4-Axis 44 of the year 2011, with a squared body, wider 44mm faceplate and bolt spacing, with a 84D angle, in wet black or wet white color like the one presented here :

http://i.ebayimg.com/t/Ritchey-WCS-Vorbau-1-1-4-fuer-Canyon-110mm-/00/s/MTIwMFgxNjAw/z/KMEAAOxyFrNRuZA3/$T2eC16VHJIQE9qUHtHWHBRuZ!25dS!~~60_12.JPG

This is for using with a Canyon Ultimate CF road bike.

Let me know what really it is ! Thanks for your understanding !